0032-11 Turbo Wastegate Solenoid current mismatch
Conditions Which Generate This Code:
The Engine Control Module (ECM) detects the following conditions:
- ECM detects current on the return circuit.
- ECM detects no current to the driver circuit.
- Battery voltage is more than 9 VDC.
System Response:
The ECM will log the diagnostic code and the ECM will trigger a snapshot. The check engine lamp will turn on once the diagnostic code has been active for one minute.
None
This diagnostic code indicates a problem with the circuit for the wastegate solenoid. Factory passwords are required to clear this diagnostic code.
Test Step 1. Perform the following diagnostic procedure: Wastegate Solenoid - Test
Results:
- OK - STOP
Caterpillar Information System:
C7 Engines for Combat and Tactical Vehicles 0032-06 Turbo Wastegate Solenoid current high
C7 Engines for Combat and Tactical Vehicles 0032-05 Turbo Wastegate Solenoid current low
C7 Engines for Combat and Tactical Vehicles 0102-07 Boost Pressure not responding
3406E Engine Atmospheric Pressure Sensor - Remove and Install
C7 Engines for Combat and Tactical Vehicles 0110-00 High Coolant Temperature Warning (61)
C7 Engines for Combat and Tactical Vehicles 0111-11 Very Low Coolant Level (62)
C15 and C18 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
C7 Engines for Combat and Tactical Vehicles 0105-11 Very High Intake Manifold Air Temperature (64)
C7 Engines for Combat and Tactical Vehicles 0190-00 Engine Overspeed Warning (35)
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Rotor Position Sensor - Calibrate
C7 Engines for Combat and Tactical Vehicles 0100-11 Very Low Oil Pressure (46)
C7 Engines for Combat and Tactical Vehicles 0110-11 Very High Coolant Temperature (61)
C7 On-highway Engine Unit Injector Hydraulic Pump
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Re-refined Base Stock Oils
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Wellhead Gas
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Fuel Effects on Maintenance Costs
C7 Engines for Combat and Tactical Vehicles 0164-00 Excessive Injection Actuation Pressure (17)
C7 Engines for Combat and Tactical Vehicles 0164-02 Injection Actuation Pressure Signal Erratic (15)
C7 Engines for Combat and Tactical Vehicles 0164-03 Injection Actuation Pressure voltage high (15)
C7 Engines for Combat and Tactical Vehicles 0164-04 Injection Actuation Pressure voltage low (15)
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Component Location - MMU Cabinet
C7 Engines for Combat and Tactical Vehicles Refill Capacities and Recommendations
2003/06/01 New Top Piston Ring {1215}
2003/06/23 New Connecting Rod {1218, 1225}