| Contact Operation for the VCS | |||
| Contacts | Raise | Off | Lower |
| 1-2 | X | ||
| 3-4 | X | ||
| 5-6 | X | X | |
| 7-8 | X | X | |
Schematic Code 400000
 | |
| Illustration 1 | g00922586 |
Schematic Code 400001
 | |
| Illustration 2 | g00922589 |
Schematic Code 400010
 | |
| Illustration 3 | g00922593 |
Schematic Code 4000011
 | |
| Illustration 4 | g00922595 |
Schematic Code 400100
 | |
| Illustration 5 | g00922597 |
(1) At start-up, this contact should be closed at 90% of the rated speed. | |
Schematic Code 400101
 | |
| Illustration 6 | g00922600 |
(1) At start-up, this contact should be closed at 90% of the rated speed. | |
Schematic Code 400110
 | |
| Illustration 7 | g00922602 |
(1) At start-up, this contact should be closed at 90% of the rated speed. | |
Schematic Code 400111
 | |
| Illustration 8 | g00922604 |
(1) At start-up, this contact should be closed at 90% of the rated speed. | |
Schematic Code 401000
 | |
| Illustration 9 | g00922605 |
(1) Voltage Controlled Switch. For contact information, see table 1. | |
Schematic Code 401001
 | |
| Illustration 10 | g00922607 |
(1) Voltage Controlled Switch. For contact information, see table 1. | |
Schematic Code 401010
 | |
| Illustration 11 | g00922608 |
(1) Voltage Controlled Switch. For contact information, see table 1. | |
Schematic Code 401011
 | |
| Illustration 12 | g00922612 |
(1) Voltage Controlled Switch. For contact information, see table 1. | |
Schematic Code 401100
 | |
| Illustration 13 | g00922613 |
(1) Voltage Controlled Switch. For contact information, see table 1. (2) At start-up, this contact should be closed at 90% of the rated speed. | |
Schematic Code 401101
 | |
| Illustration 14 | g00922614 |
(1) Voltage Controlled Switch. For contact information, see table 1. (2) At start-up, this contact should be closed at 90% of the rated speed. | |
Schematic Code 401110
 | |
| Illustration 15 | g00922615 |
(1) Voltage Controlled Switch. For contact information, see table 1. (2) At start-up, this contact should be closed at 90% of the rated speed. | |
Schematic Code 401111
 | |
| Illustration 16 | g00922616 |
(1) Voltage Controlled Switch. For contact information, see table 1. (2) At start-up, this contact should be closed at 90% of the rated speed. | |