Easy-To-Make Tool Holds Fuel Injection Nozzles According To Cylinder Number{0634,1254}
Usage:
When removed from an engine, fuel injection nozzles are usually given identification as to which cylinder each came from. This identification is of assistance during troubleshooting.
There is no tool available to hold the nozzles and make this identification. But, the illustration shows how one dealer, Power Systems Associates of Los Angeles, California, fabricated a fuel injection nozzle tool from a 9L7276 Cover. This fabricated tool will hold up to eight fuel injection nozzles, with identification of the cylinder number from which each was removed.
This tool, used to hold fuel injection nozzles, was fabricated from a 9L7276 Cover.
Caterpillar Information System:
1980/09/08 Oil Pump And Lines Group Changed To Use Different Method Of Flow Control For Emergency Lubrication System{3310,3311}
1980/09/08 Cartridge Repair Kit Available For AiResearch Turbochargers{1052,1053}
1980/09/01 5P1746 Governor Sealing Tool Available Separately{0620,1264,1286}
1980/09/01 CAUTION: Procedure For Adjustment Of Fuel Rack Setting On Hydramechanical Governors Has Been Changed{0654,1250}
1980/09/01 6V2119 Profile Tool Group Is Available For Inspection Of All Crankshafts In Caterpillar Engines{0653,1202,1203,1219,1230}
1980/09/01 6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01 Four Fabricated Tools Available For Use During Disassembly And Assembly Of Piston-Type Hydraulic Motors{5058,0622}
1980/08/25 Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings{1264,1278}
1980/08/25 Vibration Isolators Used With Vacuum Switches For Air Filter Service Indicators{7452,1051,1054}
1980/08/25 Service Meter Correction Decal Available{7478,7480}
1980/08/18 Some Valve Lifter Assemblies Have A Black Color On The Finished Surface{1209}
1980/08/18 Alcohol Fuels Are Not Recommended For Use In Caterpillar Diesel Engines At The Present Time{1280,0374}
1980/09/08 New Oil Scavenge Tube Assemblies Used In Oil Lines Groups{1307,1312}
1980/09/08 4S6553 Engine Evaluation Test Instrument Group Has Been Canceled{0651}
1980/09/08 6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/15 6V3025 Battery Cable Repair Kit Now Available{1402,1408,0611}
1980/09/15 6V2107 And 6V2110 Drive Adapter Assemblies Available To Connect Sleeve Metering Fuel Systems To Fuel Injection Test Bench{0652,1250}
1980/09/15 Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15 Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15 Reference List Of Pistons Used With The Different Types Of Connecting Rods{1214,1218}
1980/09/15 Use Only Caterpillar Water Separator Elements{1263}
1980/09/22 6V3071 Seal Guide Keeps Seal In Position During Installation Of Transfer Pump {0620,1256}
1980/09/22 Do Not Use Room Temperature Vulcanizer Compounds Or Silicone Rubber Cements On O-Ring Seals In Engines; Do Not Use Too Much As Gasket Material {1000,7555}
1980/09/22 Install A New Oil Filter Element, Clean The Oil Lines And The Remote Filter Base; Turn The Engine Until The Oil Gauge Shows Pressure Before Starting A Rebuilt Engine {1307,1318}