Boom - 5.6 m (18.37 ft)
Show/hide table
Illustration 1 | g02794210 |
Show/hide table
Specification for 235-7614 Boom and 290-9266 Boom | |||
Item | Qty | Part | Specification Description |
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the stick, the upper frame, and the cylinder pin bores. | |||
1 | 1 | 4I-4618 Pin As | Diameter is |
2 | 1 | 186-5637 Pin | Diameter is |
3 | 2 | 166-1497 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
4 | 2 | Bushing is one of the following part numbers:
Install the bushing in the bore so that the part number of the bushing is facing outward. |
|
234-3811 Bushing | Inside diameter before assembly is |
||
Installation depth is |
|||
235-7527 Bushing | Inside diameter before assembly is |
||
Installation depth is |
|||
5 | 1 | 254-2885 Pin As | Diameter is |
6 | As required, use the following shims to adjust the following maximum lateral clearance. The steel shim should be located at the boom side:
Lateral clearance for Gosselies facility is Lateral clearance except for Gosselies facility is |
||
1 | 133-2428 Shim | Thickness is |
|
1 | 4I-0575 Shim | Thickness is |
Caterpillar Information System:
325D and 329D Excavators Machine System Specifications Auxiliary Hydraulic Lines - Medium Pressure
725C2 Articulated Truck Diesel Exhaust Fluid Filter - Replace - Emission Related Component
325D and 329D Excavators Machine System Specifications Boom - 6.15 m (20.177 ft)
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Cab - Air Duct
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Specifications Cab - Air Duct
305.5E CR and 305E CR Mini Hydraulic Excavators Machine System Specifications Cab
325D and 329D Excavators Machine System Specifications Stick Cylinder
305.5E CR and 305E CR Mini Hydraulic Excavators Machine System Specifications Joystick Control
305.5E CR and 305E CR Mini Hydraulic Excavators Machine System Specifications Joystick Control
305.5E CR and 305E CR Mini Hydraulic Excavators Machine System Specifications Joystick Control
305.5E CR and 305E CR Mini Hydraulic Excavators Machine System Specifications Heater Lines
305.5E CR and 305E CR Mini Hydraulic Excavators Machine System Specifications Air Conditioner Lines
312E Excavator Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
CEM Locomotive Aftertreatment Diesel Exhaust Fluid Pump - Replace
300.9D VPS Mini Hydraulic Excavator Machine Systems Cylinder Speed - Check
325D and 329D Excavators Machine System Specifications Swing Motor Lines - Drain
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Engine Performance - Test - Engine Speed
C2.6 and C3.3B Engines for Caterpillar Built Machines Water Pump - Remove and Install
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Travel on Level Ground - Test - Optional Test
320D and 323D Excavators Machine Systems Bucket Cylinder - Remove and Install
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Travel on Level Ground - Test
305E CR and 305.5E CR Mini Hydraulic Excavators Hydraulic System Cylinder Speed - Check
312E Excavator Machine Systems Swing Gear and Bearing - Remove and Install
336E H Excavator Hydraulic System Main Hydraulic System