Installation Instructions for Fusion Hooks on Brooms{6702, 6708}
- Work Tool:
- BA30 (S/N: 7001-UP)
- BA25 (S/N: 7AW1-UP)
- BP25 (S/N: AEH1-UP)
- BA25 (S/N: 7AW1-UP)
Introduction
This Special Instruction provides information for the installation of the 317-4371 Hook Gp (Flat Back) on the above listed work tools.
Parts List
Show/hide table
Illustration 1 | g01585334 |
317-4371 Hook Gp (Flat Back) |
Show/hide table
317-4371 Hook Gp (Flat Back)     | ||
---|---|---|
Item     | Qty     | Description     |
(1)     | 8     | U-Bolt     |
(2)     | 1     | Hook AS - LH     |
(3)     | 1     | Hook As - RH     |
(4)     | 16     | Lockwasher     |
(5)     | 16     | Hard Washer     |
Note: This is a custom product that is available from Caterpillar Work Tools.
Installation
- Inspect the hooks.
Show/hide table
Illustration 2 | g01585317 |
Typical example |
- Install each hook 271 mm (10.67 inch) from the middle of the frame. Refer to illustration 3.
Note: The weight of each hook is approximately 73 N·m (54 lb ft).
Note: There is a left hand and a right hand hook.
Show/hide table
Illustration 3 | g01585376 |
(A) 271 mm (10.67 inch) (2) Hook As - LH (3) Hook As - RH |
- Secure the hooks with the supplied hardware. The required torque for the U-bolts is 100 ± 20 N·m (74 ± 15 lb ft).
Caterpillar Information System:
2008/07/14 Correction to Testing and Adjusting , "Relief Valve (Swing) - Testing and Adjusting" {5051, 5057, 5058, 5059}
2008/08/18 Improved Front Track Idler for Certain Mini Hydraulic Excavators {4159}
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Travel) - Install
2015/04/03 Recommendations for Battery Charging for Genset Usage {1401, 1406}
M313D, M315D, M316D, M318D and M322D Wheeled Excavators and M318D MH and M322D MH Wheeled Material Handlers Hydraulic System Ride Control - Test
330C Excavator Maintenance Interval Schedule
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Axles, Differential and Brakes Solenoid Valve and Mounting (Differential Lock)
314D CR Hydraulic Excavator Machine Systems Pilot Valve (Travel) - Remove
3512C and 3516C Marine Auxiliary and Generator Set Engines Generator Isolating for Maintenance
2008/07/14 New Primary Fuel Filters are Available {1260, 1261}
Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9575 Hydraulic Generator Arrangement ) and the Operation Instructions{4450, 7000} Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9575 Hydraulic Generator Arrangement ) and the Operation Instructions{4450, 7000}
314D CR Hydraulic Excavator Machine Systems Accumulator - Remove and Install
314D CR Hydraulic Excavator Machine Systems Priority Valve - Remove - Boom
308D, 314D, 321D and 328D Excavators Air Conditioning and Heating Air Conditioning System Troubleshooting - Guide for Sensors
308D, 314D, 321D and 328D Excavators Air Conditioning and Heating Actuator Troubleshooting - Guide for Actuators
320D and 323D Excavators Machine System Specifications Pump Head (Main) - Drive
C7 Engines for Caterpillar Built Machines Crankshaft Pulley
2008/07/07 Improved Manufacturing Processes Increase the Durability of Excavator Booms {6501}
385C MHPU Mobile Hydraulic Power Unit Hydraulic System General Information
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pressure Reducing Valve (Boom Priority)
320D Forest Machine Machine System Specifications Stick Cylinder Lines
314D CR Hydraulic Excavator Machine Systems Priority Valve - Install - Boom
320D Forest Machine Machine System Specifications Lines (Heel Cylinder)
314D CR Hydraulic Excavator Machine Systems Swivel - Remove