Stick - 2.40 m (7.874 ft)
Show/hide table
 | |
| Illustration 1 | g03748085 |
Right side view | |
Show/hide table
| Specification for 306-6708 Hoe Stick Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for pins, buckets, bushings, and cylinder pin bores. | |||
| 1 | - | - | The stick cylinder must be assembled in order to orient the grease zerk, as shown. |
| 2 | 1 | 349-4285 Pin As | Diameter is 69.850 ± 0.025 mm (2.7500 ± 0.0010 inch). |
| 3 | 4 | 166-1495 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 4 | 1 | 251-4938 Pin As | Diameter is 79.850 ± 0.025 mm (3.1437 ± 0.0010 inch). |
| 5 | 2 | 235-7679 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| Install the following bushing in the bore so that the part number of each bushing is facing outward. | |||
| 6 | 2 | 244-4277 Bushing | Inside diameter before assembly is 90.16 ± 0.02 mm (3.550 ± 0.001 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
| 7 | 2 | 228-5614 Bushing | Inside diameter before assembly is 70.17 ± 0.04 mm (2.763 ± 0.002 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
| 8 | 2 | 228-5615 Bushing | Inside diameter before assembly is 90.25 ± 0.04 mm (3.553 ± 0.002 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
Caterpillar Information System:
320D2 Forest Machine Machine System Specifications Boom - 5.675 m (18.6187 ft)
320D Forest Machine Machine System Specifications Stick - 2.92 m (9.6 ft)
320D2 Forest Machine Machine System Specifications Boom - 5.200 m (17.0603 ft)
390D Excavator Machine System Specifications Fuel Lines
390D Excavator Machine System Specifications Manifold and Reducing Valve (Pilot Oil)
390D Excavator Machine System Specifications Joystick Control
C32 Petroleum Generator Sets Generator Bearing Temperature - Test/Record
3508, 3512, and 3516 Generator Sets Generator Bearing - Replace
314D CR Hydraulic Excavator Machine Systems Fuel Tank - Remove
328D LCR Excavator Machine System Specifications Heater Lines
328D LCR Excavator Machine System Specifications Blade Cylinder Lines
390D Excavator Machine System Specifications Engine Mounting
385C Excavator and 385C Front Shovel Machine System Specifications Swivel
312D and 313D Excavators Specifications
312D and 313D Excavators Boom/Stick/Bucket Combinations
Extended Life Coolant (ELC) Exhibiting Nitrite Depletion in Machines Equipped with Aluminum Radiators {1352, 1395} Extended Life Coolant (ELC) Exhibiting Nitrite Depletion in Machines Equipped with Aluminum Radiators {1352, 1395}
314D CR Hydraulic Excavator Machine Systems Fuel Tank - Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Set Alignment - Check
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
C13, C15, and C18 Tier 4 Final Engines Air Lines
2008/11/03 New AccuGrade® 450 MHz and 2400 MHz Radios Are Now Available {733T}
M318D Material Handler Machine Systems Hydraulic System Pressure - Release
314D CR Hydraulic Excavator Machine Systems Accumulator - Remove and Install
Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9575 Hydraulic Generator Arrangement ) and the Operation Instructions{4450, 7000} Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9575 Hydraulic Generator Arrangement ) and the Operation Instructions{4450, 7000}