Load Control Valve (Boom Cylinder) - Install
- 需要两个人才能安置负载控制阀 (7)。 负载控制阀 (7) 的重量约为
32 kg (70 lb) 。 安装螺栓 (8)。Show/hide table
图 2 g01219715 - 安装螺栓 (6)。 连接管组件 (4) 和 (5)。 连接软管组件 (3)。
Show/hide table
图 3 g01219716 - 拧紧阀座 (1)。 拧紧螺母 (2) 至扭矩为
2.25 ± 25 N·m (20 ± 2 lb in) 。
Show/hide table
| |
| 图 1 | g01219742 |
Caterpillar Information System:
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Auxiliary Circuit) - Disassemble
320D and 323D Excavators Hydraulic System Operational Checks
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Auxiliary Circuit) - Install
Hydraulic Gear Pumps Used in Transmissions {3066, 5073} Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Electronic Control Module (ECM) - Configure
325D and 329D Excavators and 325D Material Handler Machine System Specifications Recoil Spring
320D and 323D Excavators Machine System Specifications Wiring (Battery)
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Travel Pilot (Proportional Reducing Valve) - Calibrate
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0091 FMI 08 Throttle Position signal abnormal
305.5E CR and 305E CR Mini Hydraulic Excavators Machine System Specifications Bucket Cylinder
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Remove
304C CR and 305C CR Mini Hydraulic Excavators Machine System Specifications Bucket Cylinder
2005/11/21 A Modification to the Bucket Link Improves the Operation of the Quick Coupler on Mini Hydraulic Excavators {6513}
303.5E2 CR, 304.5E2 XTC, 304E2 CR, 305.5E2 CR and 305E2 CR Mini Hydraulic Excavators Machine System Specifications Bucket Linkage
305D CR and 305.5D CR Mini Hydraulic Excavators Machine System Specifications Track
C9 Engines for Caterpillar Built Machines Water Lines
320D Excavators Capacities (Refill)
C9.3 Engine for Caterpillar Built Machines Water Lines
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track Roller (Single Flange)
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Auxiliary Circuit) - Assemble
C27 and C32 Engines for Caterpillar Built Machines E265 User Defined Shutdown
305D CR and 305.5D CR Mini Hydraulic Excavators Machine System Specifications Bucket Linkage