Track Roller - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 2     |
B     | 189-0409     | Shackle As     | 2     |
C     | 180-3034     | Repair Stand Set     | 1     |
- Raise the boom until the boom cylinder is fully extended. Fully extend the stick cylinder and the bucket cylinder.
- Attach Tooling (A), Tooling (B), and a suitable lifting device to the machine. The weight of the machine is approximately 1695 kg (3737 lb).
Show/hide table
Illustration 1 | g01176217 |
- Position the machine on Tooling (C) and suitable blocking so that the bottom of the track is approximately 254 mm (10.0 inch) from the ground.
Show/hide table
Illustration 2 | g01176161 |
- Position the bucket on suitable blocking.
- Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
- Release the track tension at fitting (1). Refer to Operation and Maintenance, "Track Adjustment - Adjust".
Show/hide table
Illustration 3 | g01176170 |
- Remove bolts (2) and track roller (3). Repeat for the remaining track rollers.
Show/hide table
Illustration 4 | g01180001 |
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 2     |
B     | 189-0409     | Shackle As     | 2     |
C     | 9S-3263     | Thread Lock Compound     | 1     |
- Apply Tooling (C) to bolts (2). Position track roller (3). Install bolts (2). Repeat for the remaining track rollers.
Show/hide table
Illustration 5 | g01180001 |
- Adjust the track tension at fitting (1). Refer to Operation and Maintenance, "Track Adjustment - Adjust".
Show/hide table
Illustration 6 | g01176170 |
- Attach Tooling (A), Tooling (B), and a suitable lifting device to the machine. The weight of the machine is approximately 1695 kg (3737 lb). Position the machine on the ground.
Show/hide table
Illustration 7 | g01176217 |
Caterpillar Information System:
320D Excavator Fuses - Replace
302.5C Mini Hydraulic Excavator Machine Systems Blower Motor (Heater) - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0586 - FMI 05
302.5C Mini Hydraulic Excavator Machine Systems Swing Motor - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0581 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0581 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0581 - FMI 03
12M Motor Grader Cooling System Coolant Sample (Level 2) - Obtain
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Relief Valve (Pilot)
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Bucket Hydraulic System
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Relief Valve (Line)
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0588 - FMI 09
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Boom Bearings - Remove and Install
C15 Generator Set Product Description
C6.6 Engines for Caterpillar Built Machines Piston and Rings
M318C and M322C Excavators Machine Systems Stick Bearings and Seals - Remove
M318C and M322C Excavators Machine Systems Stick Bearings and Seals - Install
324D and 326D Excavators Capacities (Refill)
302.5C Mini Hydraulic Excavator Machine Systems Track - Remove and Install
C11 and C13 Engines Fuel Temperature Sensor
M318C and M322C Excavators Machine Systems Stick - Remove
M318C and M322C Excavators Machine Systems Stick - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0590 - FMI 09