Housing (Front) - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean the old gasket material from front plate (3). Install a new gasket (8) on front plate (3).
Show/hide table
Illustration 2 g00579584 - Thoroughly clean the old gasket material from front housing (2) and install front housing (2) on the two dowel pins.
Show/hide table
Illustration 3 g00579582 - Install bolts (5), nut (6), and nuts (7) on front housing (2).
Show/hide table
Illustration 4 g00579581 - Install bolts (4) that fasten front plate (3) to front housing (2).
Show/hide table
Illustration 5 g00579579 - Install nut (1) on the stud.
Show/hide table
NOTICE |
---|
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine. |
Show/hide table
Illustration 1 | g00579585 |
End By:
- Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
- Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
- Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
- Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
- Install the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
- Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Caterpillar Information System:
3406E On-Highway Engine Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Assemble
3524B Engines for Off-Highway Trucks Too Much Vibration
3046 Engine For Caterpillar Built Machines Fuel Filter Base - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Disassemble
303.5 Mini Hydraulic Excavator Engine Starting
A13 Auger Work Tool Installation
320B Excavator Hydraulic System Piston Pump (Main) - Test - Constant Horsepower Flow Control
3406E and 3456 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
3406E On-Highway Engine Rocker Arm and Shaft - Install
824G , 825G and 826G Landfill Compactor Compactor Wheel Chopper Blades - Inspect/Replace
3406E On-Highway Engine Inlet and Exhaust Valve Springs - Remove and Install
3524B Engines for Off-Highway Trucks Too Much Valve Lash
302.5 Mini Hydraulic Excavator Specifications
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Visual Inspection
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Pressure - Release
Optimizing Machine Performance Over the Lifetime of the M318 Excavator{1900, 5051, 5137, 5479, 5480} Optimizing Machine Performance Over the Lifetime of the M318 Excavator{1900, 5051, 5137, 5479, 5480}
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0804 FMI 09 Interface Module (No. 4) Abnormal Update - Test
3406E On-Highway Engine Fan Drive - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0805 FMI 09 Interface Module (No. 5) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0806 FMI 09 Interface Module (No. 6) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0807 FMI 09 Interface Module (No. 7) Abnormal Update - Test
3304B and 3306B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0808 FMI 09 Interface Module (No. 8) Abnormal Update - Test