317B L and 317B LN Excavator Caterpillar


Fuses - Replace

Usage:

317B LN 6DZ



Illustration 1g00293681

The fuse panel is located on the left console. Open the access cover for fuse access.


Fuses - Fuses protect the electrical system from damage that is caused by overloaded circuits. Change a fuse if the element separates. If the element of a new fuse separates, check the circuit and/or repair the circuit.


NOTICE

Always replace fuses with the same type and capacity fuse that was removed. Otherwise, electrical damage could result.



NOTICE

If it is necessary to replace fuses frequently, an electrical problem may exist.

Contact your Caterpillar dealer.


To replace a fuse, use a puller that is stored in the fuse panel. Four fuses of 10 Amperes are contained in the fuse panel as spare fuses and two fuses of 15 Amperes are contained in the fuse panel as spare fuses.

The following list identifies the circuits that are protected by each fuse. The amperage for each fuse is included with each circuit.




Illustration 2g00383533



Illustration 3g00383594

Timer Relay (1) - 15 Amp

Cab Dome Light (2) - 5 Amp

Cab and Chassis Lamp (3) - 15 Amp

Engine Start Switch Key (4) - 10 Amp

Heater and Air Conditioner (If Equipped) (5) - 15 Amp

Horn (6) - 5 Amp

Electric Refueling Pump (If Equipped) (7) - 15 Amp

Engine Controller or Pump Controller (8) - 10 Amp

Seat Heater (If Equipped) (9) - 5 Amp

Boom Lamp (10) - 10 Amp

Radio (If Equipped) / Switch Panel (11) - 5 Amp

AUTO Lubricator (If Equipped) (12) - 10 Amp

Auxiliary Circuit (13) - 10 Amp

Cigar Lighter (14) - 10 Amp

Hydraulic Lock Limit Switch or Engine Governor (15) - 5 Amp

Hydraulic Solenoid (16) - 5 Amp

Inspection Lamp (If Equipped) (17) - 10 Amp

Lower Windshield Washer and Lower Windshield Wiper (If Equipped) (18) - 10 Amp

Converter (19) - 10 Amp

Auxiliary Circuit (20) - 10 Amp

Windshield Washer and Windshield Wiper (21) - 10 Amp

Backup (22) - 5 Amp

Auxiliary Circuit (23) - 10 Amp

Auxiliary Circuit (24) - 15 Amp

Spare (25) - 5 Amp

Spare (26) - 10 Amp

Spare (27) - 15 Amp

Caterpillar Information System:

C4.4 (Mech) Industrial Engine Troubleshooting
311B and 312B Excavators Hydraulic System Gear Pump (Blade) - Test - 312B and 312B L
M312 Excavator Machine System Boom Cylinder Lines
M312 Excavator Machine System Boom Lines - Variable Adjusting
3406C Engines for Caterpillar Built Machines Cylinder Liner
M312 Excavator Machine System Boom Lines - One Piece
M312 Excavator Machine System Auxiliary Hydraulic Lines - Boom (Variable Adjusting)
311B and 312B Excavators Hydraulic System Gear Pump (Blade) - Test - 311B
311B and 312B Excavators Hydraulic System Pump Control (Negative Flow) - Adjust - 312B and 312B L
325B and 330B Excavators Material Handlers Generator Priority Valve
M312 Excavator Machine System Auxiliary Hydraulic Lines - Boom (Variable Adjusting)
311B and 312B Excavators Hydraulic System Pump Control (Negative Flow) - Adjust - 311B
345B Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
311B and 312B Excavators Hydraulic System Gear Pump (Pilot) - Test - 311B
A7 Auger General Hazard Information
345B Excavator Machine Operation Information
345B Excavator Machine System Specifications Stick - 2500 mm (98.4 inch)
318B L and 318B LN Excavator Shipping Specifications
P16, P20, P25, P28, P40 and P60 Pulverizer Crushing Prevention and Cutting Prevention
5130 Excavator Hydraulic System Screen (Implement High Pressure)
312B Excavator Attachments Two Pump Operation
5230 Excavator Hydraulic System Pump Drive
A7 Auger Fire Prevention and Explosion Prevention
5230 Excavator Hydraulic System Relief Valve (Margin)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.