Standby Electric Sets
Usage:
Most standby units are automatic. They start, pickup the load, run and stop without an operator in attendance.
Standby units can not change the governor control setting automatically. The governor control must be preset for the proper operation of that unit. Whenever the set is exercised or operated manually, be sure the goveroner speed setting is correct for automatic operation. Check all switches to see they are properly set: Start Selector Switch in AUTOMATIC position and any Emergency Stop Switches in RUN position.
Caterpillar Information System:
D346 MARINE ENGINE Parallel Operation
D346 MARINE ENGINE Single Unit Operation
D346 MARINE ENGINE Generator Set Control Panel (If Equipped)
D346 MARINE ENGINE Generator Performance
D346 MARINE ENGINE Generator Lead Connections
D346 MARINE ENGINE Generator Identification
D346 MARINE ENGINE Safety
D346 MARINE ENGINE Model Views
D346 MARINE ENGINE Foreword
D346 MARINE ENGINE Operating Under Abnormal Conditions
D346 MARINE ENGINE Shutoff Devices
D346 MARINE ENGINE Emergency Alarms
D346 MARINE ENGINE Generator Storage
D346 MARINE ENGINE Engine Storage
D346 MARINE ENGINE Generator Lubrication and Maintenance
D346 MARINE ENGINE D346-D348-D349Marine Engines 40J1-UP, 38J1-UP, 62P1-UP
D346 MARINE ENGINE Engine Lubrication System
D346 MARINE ENGINE Air Induction And Exhaust System
D346 MARINE ENGINE Fuel System
D346 MARINE ENGINE Cooling System
D346 MARINE ENGINE Starting System
D346 MARINE ENGINE Electrical System
D346 MARINE ENGINE Power Coupling System
D346 MARINE ENGINE Miscellaneous Maintenance