Governor Linkage
Usage:
(1) With throttle in closed position make angle for lever (2) with mechanical governor ... 42°
Connect rod assembly to lever (2) in hole 1 in. (25.4 mm) from center of throttle shaft.
Caterpillar Information System:
G342 ENGINE Governor And Magneto Drive
G342 ENGINE Differential Pressure Regulator (7S7810)
G342 ENGINE Regulator For Gas Pressure (6L4104)
G342 ENGINE Vacuum Regulator (3N4630)
G342 ENGINE Gauge For Water Temperature (3N2781 and 6L2311)
G342 ENGINE Gauge For Oil Pressure (3N2780 and 6L2310)
G342 ENGINE Spark Plug And Adapter
G342 ENGINE Transformers (2W3747)
G342 ENGINE Transformers (6L2832 And 7L6791)
G342 ENGINE Magneto Timing
G342 ENGINE Magneto Timing (7L3031 Spark Gap Magneto
G342 ENGINE Magneto Drive
G342 ENGINE Turbocharger (Schwitzer 4MD354)
G342 ENGINE Valve Rocker Arms And Lifters
G342 ENGINE Timing Gears
G342 ENGINE Service Meter
G342 ENGINE Valves
G342 ENGINE Camshaft
G342 ENGINE Cylinder Head (Engines With Spacer Plates
G342 ENGINE Cylinder Head (Engines Without Spacer Plates)
G342 ENGINE Oil Pump
G342 ENGINE Oil Pump Valves
G342 ENGINE Oil Pump Drive
G342 ENGINE Oil Filter