Fuel Injection Lines
Show/hide table
图 1 | g00493735 |
Show/hide table
确保高压油管夹箍安装在正确位置。 未正确安装的夹箍可能使高压油管因振动而逐渐损坏。 损坏的油管可能渗漏燃油,引起火灾。 |
注: 所有尺寸参考垂直线 (1) 。 该线与 1 号喷油泵出口中心相对应。
(1) 通过 1 号喷油泵的垂直线
将所有喷油管卡箍拧紧至以下扭矩。 ... 2.25 N·m (20 lb in)
注: 为正确拧紧喷油管卡箍,可使用 6V-4980 扭矩改锥工具组件 。
Show/hide table
喷油管卡箍的位置     | |
尺寸     | 相对参考线的距离     |
A     | 281 ± 3 mm (11.03 ± .12 in)     |
B     | 187 ± 1 mm (7.36 ± .04 in)     |
C     | 35 ± 3 mm (1.38 ± .12 in)     |
D     | 185 ± 3 mm (7.28 ± .12 in)     |
E     | 282 ± 3 mm (11.10 ± .12 in)     |
F     | 529 ± 3 mm (20.83 ± .12 in)     |
Show/hide table
图 2 | g00510826 |
(2) 喷油管螺母
- 将喷油管螺母拧紧至以下扭矩。 ... 42.0 ± 7 N·m (31 ± 5 lb ft)
(3) 喷油器上的适配器挡圈
- 将适配器上的挡圈拧紧至以下扭矩。 ... 48 ± 7 N·m (35 ± 5 lb ft)
(4) 喷油管上的卡箍螺母
- 将喷油管卡箍上的螺母拧紧至以下扭矩。 ... 14 ± 3 N·m (10 ± 2 lb ft)
Caterpillar Information System:
3406E Truck Engines Engine Support (Front)
3306B Industrial Engine Air Starting System
3408E and 3412E Engines for Caterpillar Built Machines Coolant Temperature Sensor
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C-10 and C-12 Industrial Engines Fuel Temperature Sensor
3408E and 3412E Engines for Caterpillar Built Machines Inlet Air Temperature Sensor
3306B Industrial Engine Electrical System
3306B Industrial Engine Model View Illustrations
G3612 and G3616 Engines Engine Supervisory System
3306B Industrial Engine Safety Signs and Labels
3306B Industrial Engine Air Inlet and Exhaust System
3406C (PEEC III) Truck Engine Turbocharger
3406E On-Highway Engine Electric Starting Motor - Remove and Install
G3612 and G3616 Engines Pressure Relief Valve Setting
3406E Truck Engines Electric Starting Motor
3306B Industrial Engine Starting the Engine
C-10 and C-12 Industrial Engines Inlet Air Temperature Sensor
3306B Industrial Engine Refill Capacities
3406C (PEEC III) Truck Engine Engine Oil Filter Base
3406C (PEEC III) Truck Engine Engine Oil Pan
3406C (PEEC III) Truck Engine Engine Oil Pressure
3406C Engines for Caterpillar Built Machines Fuel Injection Pump Housing
3406E On-Highway Engine Water Temperature Regulator - Remove and Install
C-10 and C-12 Truck Engines Belt Tensioner