New Engine Software for Certain C7.1 Engines {1920}
- Excavator
- 326 (S/N: KYJ1-UP)
- 326F (S/N: CJ81-1,10101-UP; HCA1-UP; GGJ1-20171,20175-UP; HCJ1-189,10001-UP; EBK1-UP; XFK1-271,10001-UP; WGL1-1020,10001-UP; FBR1-20789,20791-20795,20797-UP; TMR1-167,10001-UP)
- 329F (S/N: YHA1-UP; ERL1-UP; RCN1-UP; GCX1-1,10101-UP)
- 330F (S/N: KFA1-UP; WBA1-322,10001-UP; JHF1-UP; LCG1-138,10001-10017,20001-UP; HCK1-UP; LBN1-398,10001-UP; H5R1-1,90102-UP; JFR1-231,10001-10082,20001-UP; GHT1-UP; HBT1-157,10001-10129,20001-UP; MBX1-565,10001-10665,20001-UP)
- 335F (S/N: KNE1-771,10001-UP; SGJ1-UP; KHM1-10106,90200-UP; FEP1-UP)
- 326F (S/N: CJ81-1,10101-UP; HCA1-UP; GGJ1-20171,20175-UP; HCJ1-189,10001-UP; EBK1-UP; XFK1-271,10001-UP; WGL1-1020,10001-UP; FBR1-20789,20791-20795,20797-UP; TMR1-167,10001-UP)
- Forest Machine
- 548 (S/N: WRA1-UP; SFZ1-UP)
- Mobile Hydraulic Power Unit
- 330FMHPU (S/N: B321-UP; B331-UP; DPL1-117,10101-UP)
- OEM Excavator Based Specialty Solution
- 330F OEM (S/N: LNX1-114,10001-UP; DPY1-UP)
Description Of Change: New engine software is available. The new engine software enables the idle hold strategy and aligns the engine and machine minimum idle hold speed to 800rpm. This strategy protects against turbo bearing damage during cold start conditions.
Adaptable To:
Show/hide table
Existing Part Number | New Part Number | Description |
---|---|---|
567-9929 | Engine Software | |
567-9930 | Engine Software |
Show/hide table
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Download new engine software from SIS Web.
Install the new engine software. Refer to Troubleshooting, ECM Software - Install for the correct procedure.
Caterpillar Information System:
Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265} Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265}
New Machine Software Groups are Now Used on Certain Telehandlers {7610, 7620} New Machine Software Groups are Now Used on Certain Telehandlers {7610, 7620}
Air Bubbles Can Be Visible on Films Applied on Certain Material Handlers and Wheeled Excavators {7405, 7557} Air Bubbles Can Be Visible on Films Applied on Certain Material Handlers and Wheeled Excavators {7405, 7557}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161} New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Identifying Oil Leaks on Certain 3500 Mining Machine Engines {1151, 1348} Identifying Oil Leaks on Certain 3500 Mining Machine Engines {1151, 1348}
An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713} An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713}
New Hard Washers are Used for the Mounting Hardware on the Oil Scavenge Pump for Certain C175 Off-Highway Truck Engines {1312} New Hard Washers are Used for the Mounting Hardware on the Oil Scavenge Pump for Certain C175 Off-Highway Truck Engines {1312}
An Improved Cooling System Venting Procedure is Now Available in the Operation and Maintenance Manual for Certain C175 Off-Highway Truck Engines {0374, 1350} An Improved Cooling System Venting Procedure is Now Available in the Operation and Maintenance Manual for Certain C175 Off-Highway Truck Engines {0374, 1350}
Premature Nose-Cone and King-Pin Wear May Occur on Certain 794, 796, and 798 Off-Highway Trucks {3260, 4314} Premature Nose-Cone and King-Pin Wear May Occur on Certain 794, 796, and 798 Off-Highway Trucks {3260, 4314}
Body May Interfere with Mud Guard at Rear of Left Fender Group {4220, 7252} Body May Interfere with Mud Guard at Rear of Left Fender Group {4220, 7252}
The Hoist Lines Group is Improved on Certain 793D Off-Highway Trucks {5057} The Hoist Lines Group is Improved on Certain 793D Off-Highway Trucks {5057}
776D and 777D Off-Highway Truck/Tractor Tire Inflation - Check
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129} Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150} Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150}
A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054} A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054}
725C2 and 730C2 Articulated Truck Machine System Sensor - Remove and Install - Payload
521B and 522B Track Feller Bunchers Tilt Platform Stabilizer - Inspect/Adjust
New Air Cleaner Kit Is Now Available for Certain 836K Landfill Compactors {0679, 1051, 1071, 1408} New Air Cleaner Kit Is Now Available for Certain 836K Landfill Compactors {0679, 1051, 1071, 1408}
A Rework Procedure Is Now Available for Providing More Lubrication to the Transmission Clutch Number Three on Certain 700 Series Articulated Trucks {3030, 3160} A Rework Procedure Is Now Available for Providing More Lubrication to the Transmission Clutch Number Three on Certain 700 Series Articulated Trucks {3030, 3160}
New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408} New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408}
B1, B2, B4, B6 and B8 Hydraulic Hammers Head Nuts - Tighten
794 AC Off-Highway Truck Field Assembly Platform - Install - Superstructure
Interference Between Cable Assembly and Hydraulic Fan Case Drain Hose Assembly May Occur on Certain 793D Off-Highway Trucks {1408, 5057} Interference Between Cable Assembly and Hydraulic Fan Case Drain Hose Assembly May Occur on Certain 793D Off-Highway Trucks {1408, 5057}
CX38 CL6 Top Hat Rework Conversion of Assemblies 367-9371 to 490-8824 {3030, 3160} CX38 CL6 Top Hat Rework Conversion of Assemblies 367-9371 to 490-8824 {3030, 3160}