Piston Pump (Implement)
Show/hide table
Illustration 1 | g06250254 |
Show/hide table
Item | Qty | Part | Specification Description |
1 | 6 | 095-0706 Bolt | Torque to |
2 | 5 | 8T-0267 Bolt | Before assembly, apply Loctite 243 to threads. |
3 | 1 | 214-6489 Ball | Lubricate sliding surfaces lightly with hydraulic oil. |
4 | 2 | 6V-5686 Bolt | Torque to |
5 | 1 | 148-3548 Special Race Bearing | Lubricate sliding surfaces lightly with hydraulic oil. |
6 | 1 | 187-9116 Pump Barrel As | Lubricate sliding surfaces lightly with hydraulic oil. |
7 | 9 | 120-7508 Bushing | Ensure that all surfaces of bearing must be clean.
Bore after assembly is Installation depth is |
8 | 4 | 9S-4181 Plug | Torque to |
9 | 9 | 150-4355 Piston | Lubricate sliding surfaces lightly with hydraulic oil. |
10 | 1 | 250-3462 Special Roller Bearing | Lubricate sliding surfaces lightly with hydraulic oil. |
11 | 1 | 159-7320 Retainer Plate | Lubricate sliding surfaces lightly with hydraulic oil. |
12 | 1 | 314-3243 Swashplate | Lubricate sliding surfaces lightly with hydraulic oil. |
13 | 3 | 5A-3604 Bolt | Before assembly, apply Loctite 243 to threads. |
Show/hide table
Illustration 2 | g06250437 |
Section C-C |
Show/hide table
Item | Qty | Part | Specification Description |
14 | 1 | 251-7828 Port Plate | Lubricate sliding surfaces lightly with hydraulic oil. |
Show/hide table
Illustration 3 | g06250451 |
Section D-D |
Show/hide table
Item | Qty | Part | Specification Description |
15 | 1 | 265-8956 Pump Housing Assembly | Bore must be free of oil, grease, and chips. Install 124-1555 Plug with ball facing out. Ensure that top of sleeve is not above surface of housing. Press ball into sleeve until ball is below the edge of sleeve |
16 | 1 | 158-3504 Control Spool | Lubricate sliding surfaces lightly with hydraulic oil. |
17 | 1 | 270-7898 Spring | Length under test force is Test force is Free length after test is |
18 | 1 | 267-3741 Actuator | Lubricate sliding surfaces lightly with hydraulic oil. |
19 | 1 | 7Y-4224 Orifice | Do not apply sealant.
Torque to |
20 | 1 | 214-2445 Spring | Length under test force is Test force is Free length after test is |
21 | 1 | 316-1438 Cartridge As | Torque to |
22 | 1 | 198-2914 Nut | Torque to |
23 | 4 | 162-2165 Bolt | Torque to |
24 | 1 | 177-1405 Spring | Length under test force is Test force is Free length after test is |
25 | 1 | 6J-2680 O-Ring Seal | Lubricate O-ring seal lightly with the lubricant that is being sealed. |
26 | 1 | 322-2018 Actuator Slide | Lubricate sliding surfaces lightly with hydraulic oil. |
Caterpillar Information System:
Electric Horn May Malfunction on Certain Telehandlers {4300, 4312} Electric Horn May Malfunction on Certain Telehandlers {4300, 4312}
New Software Is Now Used On Certain F Series Material Handlers and Wheeled Excavators {7610, 7620} New Software Is Now Used On Certain F Series Material Handlers and Wheeled Excavators {7610, 7620}
994K Wheel Loader Systems Parking Brake
Procedure to Repair the Dump Body Pivot Point Channels Is Now Available on Certain 700 Series Articulated Trucks {0679, 7250, 7258} Procedure to Repair the Dump Body Pivot Point Channels Is Now Available on Certain 700 Series Articulated Trucks {0679, 7250, 7258}
New Assembly Hardware is Now Available for the CX38 Clutch Housing on Certain 700 C-Series Articulated Trucks {3160} New Assembly Hardware is Now Available for the CX38 Clutch Housing on Certain 700 C-Series Articulated Trucks {3160}
Regulatory Compliance Information Wireless Device - Tire Pressure Antenna (Gateway Series) - If Equipped
The Pinion Bearing is Failing on Certain 797 Off-Highway Trucks {3256, 3258, 3281} The Pinion Bearing is Failing on Certain 797 Off-Highway Trucks {3256, 3258, 3281}
Regulatory Compliance Information Wireless Device - APS2 Tire Sensor- If Equipped
Procedure to Install Grade Sensor Mounting Brackets on Certain Asphalt Pavers and Asphalt Screeds {1408, 1439, 5645, 7000, 7050, 7220} Procedure to Install Grade Sensor Mounting Brackets on Certain Asphalt Pavers and Asphalt Screeds {1408, 1439, 5645, 7000, 7050, 7220}
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Remove and Install
Instructions to Obtain Machine Disclosure Labeling for Non-Road Mobile Machinery in China {7000} Instructions to Obtain Machine Disclosure Labeling for Non-Road Mobile Machinery in China {7000}
New Grade and Slope Sensor Mounting Group is Now Available on Certain Asphalt Pavers and Asphalt Screeds {1408, 5643} New Grade and Slope Sensor Mounting Group is Now Available on Certain Asphalt Pavers and Asphalt Screeds {1408, 5643}
994K Wheel Loader Systems Piston Pump (Implement)
994K Wheel Loader Systems Pump Drive
994K Wheel Loader Systems Relief Valve - Tilt Cylinder Rod End
994K Wheel Loader Systems Relief Valve
994K Wheel Loader Systems Relief Valve
994K Wheel Loader Systems Selector and Pressure Control Valve (Transmission)
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Hydraulic Cylinder - Remove and Install
New Hose Assembly and Brackets are Now Used on Certain 3524 Off-Highway Trucks Engines {1380} New Hose Assembly and Brackets are Now Used on Certain 3524 Off-Highway Trucks Engines {1380}
994K Wheel Loader Systems Selector and Pressure Control Valve (Transmission)
994K Wheel Loader Systems Sequence Valve
994K Wheel Loader Systems Service Brakes
PLE601 Network Manager ECM to RS232 and RS485 Harness Installation {1000, 7000} PLE601 Network Manager ECM to RS232 and RS485 Harness Installation {1000, 7000}