Engine Oil Pan
Show/hide table
Illustration 1 | g00381492 |
Front sump |
Show/hide table
Illustration 2 | g00381512 |
Rear sump |
(1) Apply 9S-3263 Thread Lock Compound to the plug. Tighten the plugs to the following torque. ... 80 ± 11 N·m (60 ± 8 lb ft)
(2) Install the gasket for the magnetic drain plugs with the seam against the oil pan. Tighten the magnetic drain plugs to the following torque. ... 70 ± 14 N·m (50 ± 10 lb ft)
Note: Change all gaskets and torque all drain plugs at each oil change.
Caterpillar Information System:
3406E Truck Engine Engine Oil Pump
3176C and 3196 Industrial Engines Air Starting Motor Lubricator Oil Level - Check - If Equipped
3406E and 3456 Industrial Engines Engine Oil Filter Base
C15 and C18 Petroleum Generator Sets Ether Starting Aid Cylinder - Replace - If Equipped
3406E and 3456 Industrial Engines Turbocharger
3406E and 3456 Industrial Engines Exhaust Manifold
3406E and 3456 Industrial Engines Cylinder Head Valves
3034 Engine for Caterpillar Built Machines Electric Starting Motor
3406E and 3456 Industrial Engines Vibration Damper
3406E and 3456 Industrial Engines Fuel Transfer Pump
3406E and 3456 Industrial Engines Engine Design
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Alternator and Regulator
3406E and 3456 Industrial Engines Engine Oil Filler
3406E and 3456 Industrial Engines Fan Drive
3406C Engines for Caterpillar Built Machines Cylinder Liner
3406E and 3456 Industrial Engines Cylinder Liner
3406E and 3456 Industrial Engines Piston and Rings
3406E Truck Engines Piston and Rings
3406E and 3456 Industrial Engines Coolant Level Sensor
3406E and 3456 Industrial Engines Engine Support (Front)
C4.4 (Mech) Industrial Engine Troubleshooting
3406E and 3456 Industrial Engines Flywheel Housing
C15 and C18 Petroleum Generator Sets Overhaul Considerations
3406E Generator Set Engines Engine Warm-up