Piston Motor (Swing) - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Start By:
- Remove Air Cleaner.
- Remove 3 hose assemblies (2).
- Remove 4 bolts (3).
- Attach a suitable lifting device to swing motor (1) and remove swing motor (1).
Show/hide table
Illustration 1 | g06163307 |
- Install swing motor (1) in reverse order of removal.
Caterpillar Information System:
An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324} An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324}
C7.1 Engines and Generator Sets Exhaust Has Excessive White Smoke
980L Tier 3 Wheel Loader Machine System Piston Pump (Brake, Pilot, Fan) - Disassemble
C7.1 Engines and Generator Sets Exhaust Has Excessive Black Smoke
C7.1 Engines and Generator Sets Engine Vibration Is Excessive
C7.1 Engines and Generator Sets Engine Top Speed Is Not Obtained
2570D and 2670D Wheel Feller Buncher Engine Supplement Solenoid Valve (DEF Heater Coolant) - Remove and Install
C7.1 Engines and Generator Sets Engine Stalls at Low RPM
C7.1 Engines and Generator Sets Engine Shutdown Occurs Intermittently
980L Tier 3 Wheel Loader Machine System Piston Pump (Brake, Pilot, Fan) - Assemble
CB54B Vibratory Asphalt Compactor Machine Systems Vibratory Lines Group
C7.1 Engines and Generator Sets Engine Shutdown Occurrence
MH3037 Material Handler Machine Systems Piston Motor (Swing) - Disassemble
MH3037 Material Handler Machine Systems Piston Motor (Swing) - Assemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Filter Housing - Remove and Install
Installation of the 519-9196 Lines Gp - Coupler on Certain Backhoe Loaders {5057, 5133, 6129} Installation of the 519-9196 Lines Gp - Coupler on Certain Backhoe Loaders {5057, 5133, 6129}
A New Ground Strap for Wiring Group is Now Used On Certain 794 AC Off-Highway Trucks {1408, 3260, 3282} A New Ground Strap for Wiring Group is Now Used On Certain 794 AC Off-Highway Trucks {1408, 3260, 3282}
2570D and 2670D Wheel Feller Buncher Engine Supplement Fan - Remove and Install
Index of Reuse and Salvage Guidelines for the CX38 Transmission {0374, 0599, 0700, 0722, 3030, 3065} Index of Reuse and Salvage Guidelines for the CX38 Transmission {0374, 0599, 0700, 0722, 3030, 3065}
Cab Heater Hoses May Rub Against the Cross Member on Certain PL61 Pipelayers {7304} Cab Heater Hoses May Rub Against the Cross Member on Certain PL61 Pipelayers {7304}
A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802} A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Pressure - Test and Adjust
994K Wheel Loader Machine Systems Seat - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install