Air Inlet and Exhaust Lines
Show/hide table
Illustration 1 | g00294870 |
Show/hide table
Illustration 2 | g00294871 |
Bolt tightening sequence |
(1) Bolt
Tighten the bolts for the aftercooler according to the following procedure:
- Assemble the seals to the aftercooler core.
- Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.
- Assemble the aftercooler with seals to the inlet manifold.
- Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess.
- Install the aftercooler cover.
- Inspect the upper seal in order to ensure that the seal is seating correctly in the recess.
- Install the cover bolts. Hand tighten the cover bolts.
- Tighten the bolts according to the numerical sequence.
Torque ... 24 N·m (18 lb ft)
- Tighten the bolts again according to the numerical sequence.
Torque ... 47 N·m (35 lb ft)
- Remove the tape.
(2) Plug
-
Apply 4C-5598 Anti-Seize Compound to the threads of the plug.
- Torque ... 20 ± 5 N·m (15 ± 4 lb ft)
Caterpillar Information System:
3500 Generator Set Engines Engine Design
3500 Generator Set Engines Engine Design
3054 Engine Crankshaft
3054 Engine Cylinder Block
3500B Engines for Caterpillar Built Power Modules Exhaust Manifold
3500B Engines for Caterpillar Built Power Modules Exhaust Manifold
G3500 Engines Cylinder Pressure - Measure/Record
3500 Generator Set Engines Engine Design
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Piston and Rings - Two-Piece Piston
G3606 and G3608 Engines Aftercooler Condensation - Drain
3054 Engine Housing (Front)
G3606 and G3608 Engines Safety Messages
G3612 and G3616 Engines Engine Mounts - Check
3054 Engine Flywheel and Flywheel Housing Runout
3500 Engines for Caterpillar Built Generator Sets Manual Shutoff
3054 Engine Electric Starting Motor
G3612 and G3616 Engines Gas Pressure Regulator - Inspect/Replace
3500B and 3500B High Displacement Generator Set Engines Air Inlet and Exhaust Lines
G3612 and G3616 Engines Ignition System Spark Plugs - Check/Adjust
3500B Locomotive Engines Air Inlet and Exhaust Lines
Disassembly And Assembly Of The 144-0835 Unit Injector Hydraulic Pump Disassembly And Assembly Of The 144-0835 Unit Injector Hydraulic Pump
3500 Generator Set Engines Aftercooler
3306B Industrial Engine Magnetic Switch
3500B and 3500B High Displacement Generator Set Engines Prelube Pump