Turbocharger
Show/hide table
Illustration 1 | g00294544 |
Right view |
(1) Clamp bolts
- Tighten the clamp bolts.
Torque ... 9.5 ± 1.0 N·m (84 ± 9 lb in)
- Gently tap the clamp bolts with a soft faced hammer.
- Tighten the clamp bolts again.
Torque ... 9.5 ± 1.0 N·m (84 ± 9 lb in)
(2) Clamp bolts
- Tighten the clamp bolts.
Torque ... 14.0 ± 1.5 N·m (10 ± 1 lb ft)
- Gently tap the clamp bolts with a soft faced hammer.
- Tighten the clamp bolts again.
Torque ... 14.0 ± 1.5 N·m (10 ± 1 lb ft)
(3) Bolt
-
Put 5P-3931 Anti-Seize Compound on the washer face and the bolt threads before assembly.
- Torque ... 54 ± 5 N·m (40 ± 4 lb ft)
Caterpillar Information System:
3126B Industrial Engine Refrigerant Compressor
3500B and 3500B High Displacement Generator Set Engines Turbocharger
3500B Engines for Caterpillar Built Power Modules Turbocharger
3054 Engine Gear Group (Front)
G3606 and G3608 Engines Model View Illustrations
3054 Engine Camshaft
G3612 and G3616 Engines Engine Operation
C-9 Engines for Caterpillar Built Machines Speed/Timing Sensor
3406E Truck Engines Basic Block
3500 Generator Set Engines Alternator and Regulator
3500 Engines for Caterpillar Built Generator Sets Fuel Injection Control Linkage
3054 Engine Engine Oil Pressure
G3606 and G3608 Engines Safety Messages
3054 Engine Housing (Front)
G3606 and G3608 Engines Aftercooler Condensation - Drain
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Piston and Rings - Two-Piece Piston
3500 Generator Set Engines Engine Design
G3500 Engines Cylinder Pressure - Measure/Record
3500B Engines for Caterpillar Built Power Modules Exhaust Manifold
3500B Engines for Caterpillar Built Power Modules Exhaust Manifold
3054 Engine Cylinder Block
3054 Engine Crankshaft
3500 Generator Set Engines Engine Design
3500 Generator Set Engines Engine Design