Product Evaluation Report - AFA Bad Report {0374, 1000}
- Engine
- 3054 and 3056
- 3200
- 3300
- 3400
- 3400 All, 3300 All, 3200 All, 3100 All, 3000 All, and D-series All
- 3500 and G3500 Engines
- All 3600 Engines
- All C280 Engines
- All Marine Propulsion, Marine Auxiliary, and Marine Generator Sets
- C-10 All
- C-9 and C9 All
- C11 All
- C12 and C-12 All
- C13 and C-13 All
- C15 and C-15 All
- C16 and C-16 All
- C175 Engines
- C18 and C-18 Engines
- C27 Engines
- C32 Engines
- C4.4 Engines
- C6.6
- C7 All
- C7.1
- 3200
Introduction
This is an example of a bad AFA report. Pleasereview the notes that explain what is wrong with each section of this report, and what could be improved to better communicate the information necessary for a proper failure analysis. (Notes are indicated by a box with bolded text at the beginning of each section.)
Show/hide table
Title should state "Failure Analysis Report" for consistency across dealers. |
Show/hide table
Tech. Communicator: Joe Marine | Date: 9/15/2015 | Service Job #: 123456 | Segment #: 1 |
Customer Name: ABC Co. | Customer Contact: Mr. ABC | Phone #: 123-456-789 | Vessel/Rig Name: M/V Majestic Cat |
Show/hide table
Engine Mod. #: 3516 | Serial #: TKT00001 | Arrangement #: 395-1200 |
Delivery Date: 6/21/14 | Hrs. / Miles: 8268 | Perf. Spec.: 418-2907 |
Rating: 3000 HP at 1800 rpm | Application: Marine Prop | Eng. Loc.: SME |
Description of Complaint:
Show/hide table
This does not include a description of the failure mode. |
Check engine for noise at the upper rear of the engine.
Facts Observed:
Show/hide table
a. This is a summary of which components were damaged; this does not meet the intent of Section #2 of the Failure Analysis Report process which includes observations of the failed components and supporting data such as ECM Downloads, SOS, operator interviews, etc. b. There is no reference to valve lash measurements or records. |
- Discovered a hole in the 7C-7910 air intake elbow that is located between the aftercooler and the # 16 cylinder head.
- # 16 cylinder lower intake valve has a chordal failure.
- # 15 & # 16 injector tips have impact damage.
- Turbocharger exhaust wheel has damage.
- Found debris damage in the # 15 & # 16 cylinder.
Engine Failure Timeline:
Show/hide table
a. The timeline does not provide how the engine was being operated prior to the failure. b. The timeline does not indicate what failed first. |
- The engine was running.
- Noise and smoke and fire discovered at the aftercooler.
- Engine was killed.
Summary of Analysis:
Show/hide table
a. There is no list of possible root causes. b. There is no evaluation of the facts to eliminate possible root causes. c. There is no determination of what additional steps may be needed to confirm a root cause. |
It is XXXXXXX’s opinion that the intake valve has a chordal failure.
Recommendation:
Show/hide table
a. There is no statement of the root cause of the chordal fracture. b. There are no facts provided that support lack of proper valve adjustment as a contributing factor. c. There is no summary of the repair steps that were taken. d. There was no recommendation to ensure that a repeat failure of sister cylinder heads can be avoided. |
- Adjust the valve lash per the O & M Guide.
- Perform a top end overhaul.
- Overhaul schedule attached below.
Photos
- Discovered a hole in the 7C-7910 air intake elbow that is located between the aftercooler and the # 16 cylinder head.
Show/hide table
Table 9 This is consequential damage and is not necessary. Show/hide tableIllustration 2 g06100012 - Looks like the # 16 lower intake valve pieces shot out of the 7C-7910 air intake elbow.
Show/hide table
Illustration 3 g06100015 - # 16 cylinder head. The lower intake valve has a chordal failure.
Show/hide table
Illustration 4 g06100023 - Closer view of the # 16 cylinder head. The lower intake valve has a chordal failure.
Show/hide table
Table 10 a. The failed intake valve was not removed and evaluated.
b. The non-failed intake valve was not removed and evaluated.
c. There is no reference to any supporting documentation such as ECM downloads or Product Status reports.
Show/hide table
Illustration 1 | g06100006 |
Failure analysis performed by:
Joe Marine
Cat Dealer
Technical Communicator
Caterpillar Information System:
AP355F Asphalt Paver Propel Systems Piston Motor (Propel)
AP355F Asphalt Paver Propel Systems Piston Pump (Propel)
A Procedure to Relocate the Air Conditioner Pressure Switch on Certain C-Series Articulated Trucks is Now Available {1405, 1408, 1808, 7320} A Procedure to Relocate the Air Conditioner Pressure Switch on Certain C-Series Articulated Trucks is Now Available {1405, 1408, 1808, 7320}
558 Forest Machine Machine Systems Cylinder Speed - Check
AP355F Asphalt Paver Propel Systems Location of Hydraulic Components
Procedure to Relocate the Air Conditioner Pressure Switch on Certain C-Series Articulated Trucks {1405, 1408, 1808, 7320} Procedure to Relocate the Air Conditioner Pressure Switch on Certain C-Series Articulated Trucks {1405, 1408, 1808, 7320}
AP355F Asphalt Paver Propel Systems Location of Electrical Components
® for Personnel General Information
558 Forest Machine Machine Systems Cylinder Drift - Check - Loaded Bucket
AP355F Asphalt Paver Propel Systems Operator Controls (Propel System)
AP355F Asphalt Paver Propel Systems General Information (Propel System)
558 Forest Machine Machine Systems Cylinder Drift - Check - Empty Bucket
AP355F Asphalt Paver Propel Systems Final Drive Planetary
® for Personnel System Components
AP355F Asphalt Paver Propel Systems Electrical Schematic (Propel System)
® for Personnel System Operation
AP355F Asphalt Paver Machine Systems Location of Electrical Components (Auger Conveyor)
AP355F Asphalt Paver Machine Systems Location of Components (Auger and Conveyor System)
AP355F Asphalt Paver Propel Systems Hydraulic Schematic (Propel System)
C4.4 and C6.6 Engines Acceleration Is Poor or Throttle Response Is Poor
558 Forest Machine Machine Systems Swing Motor - Test - Measurement of Case Drain Oil
558 Forest Machine Machine Systems Relief Valve (Swing) - Test and Adjust
AP355F Asphalt Paver Machine Systems Hydraulic Cylinder (Screed Hoist)
AP355F Asphalt Paver Machine Systems Hydraulic Cylinder (Auger Hoist)