Piston Cooling Tubes
Usage:
Remove Piston Cooling Tubes
start by:
a) remove oil pump
1. Turn the crankshaft until the connecting rod is away from piston cooling tube (1).
2. Remove the bolt and lock from tube. Remove the piston cooling tube (1).
Install Piston Cooling Tubes
1. Put the piston cooling tube in position on cylinder block, and install the bolt (1) and lock.
Show/hide table
NOTICE |
---|
Do not install a bent or damaged cooling tube, or damage to the engine may result. |
end by:
a) install oil pump
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Oil Pump
1674 DIESEL TRUCK ENGINE Oil Pan
1674 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
1674 DIESEL TRUCK ENGINE Governor
1674 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1674 DIESEL TRUCK ENGINE Variable Timing Unit
1674 DIESEL TRUCK ENGINE Fuel Transfer Pump
1674 DIESEL TRUCK ENGINE Fuel Shutoff Solenoid
1674 DIESEL TRUCK ENGINE Housing
1674 DIESEL TRUCK ENGINE Fuel Filter Bypass Valve
1674 DIESEL TRUCK ENGINE Fuel Ratio Control
1674 DIESEL TRUCK ENGINE Air Compressor
1674 DIESEL TRUCK ENGINE Connecting Rod Bearings
1674 DIESEL TRUCK ENGINE Crankshaft Main Bearings
1674 DIESEL TRUCK ENGINE Fan
1674 DIESEL TRUCK ENGINE Fan Drive
1674 DIESEL TRUCK ENGINE Vibration Damper And Crankshaft Hub
1674 DIESEL TRUCK ENGINE Engine Front Support
1674 DIESEL TRUCK ENGINE Crankshaft Front Seal And Wear Sleeve
1674 DIESEL TRUCK ENGINE Front Cover
1674 DIESEL TRUCK ENGINE Aftercooler Core
1674 DIESEL TRUCK ENGINE Fuel Injection Lines
1674 DIESEL TRUCK ENGINE Water Temperature Regulator
1674 DIESEL TRUCK ENGINE Turbocharger