Alternator
Usage:
Remove Alternator
1. Loosen bolts (1) and (2).
2. Turn nut (3) clockwise to loosen the drive belts.
3. Remove drive belts (4) from alternator.
4. Remove the nuts and bolts (1) and (2). Remove the alternator.
Install Alternator
1. Put the alternator in position on engine, and install the nuts and bolts.
2. Put the drive belts in place. Turn the nut (2) counterclockwise to tighten the drive belts. Tighten the belts until they have tension given in OPERATION AND MAINTENANCE GUIDE.
3. Tighten nut (1) and bolts.
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Starter
1674 DIESEL TRUCK ENGINE Testing And Adjusting
1674 DIESEL TRUCK ENGINE Systems Operation
7241 MARINE TRANSMISSION Control Valve
7241 MARINE TRANSMISSION Bottom Shaft
7241 MARINE TRANSMISSION Idler Gear
7241 MARINE TRANSMISSION Planetary Gear Section
7241 MARINE TRANSMISSION Top Shaft
7241 MARINE TRANSMISSION Testing And Adjusting
7241 MARINE TRANSMISSION Systems Operation
7241 MARINE TRANSMISSION Control Valve (3T2295)
7241 MARINE TRANSMISSION Oil Filter (2S6457)
1674 DIESEL TRUCK ENGINE Bypass Valves
1674 DIESEL TRUCK ENGINE Water Pump
1674 DIESEL TRUCK ENGINE Oil Cooler
1674 DIESEL TRUCK ENGINE Air Compressor
1674 DIESEL TRUCK ENGINE Fuel Ratio Control
1674 DIESEL TRUCK ENGINE Fuel Filter Bypass Valve
1674 DIESEL TRUCK ENGINE Housing
1674 DIESEL TRUCK ENGINE Fuel Shutoff Solenoid
1674 DIESEL TRUCK ENGINE Fuel Transfer Pump
1674 DIESEL TRUCK ENGINE Variable Timing Unit
1674 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1674 DIESEL TRUCK ENGINE Governor