Secondary Engine Speed/Timing Sensor - Remove and Install
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 滑动锁扣 (3) 到解锁位置。 将线束组件 (4) 从辅助发动机转速传感器 (2) 上断开。
- 将六角螺栓 (5) 从辅助发动机转速传感器 (2) 上拆下。
- 将辅助发动机转速传感器 (2) 从前壳体适配器 (1) 上拆下。
注: 不要使用杠杆来拆下辅助发动机转速传感器。
- 将 O 形密封圈 (6) 从辅助发动机转速传感器 (2) 上拆下。
Show/hide table
| |
| 图 1 | g03692739 |
Show/hide table
| |
| 图 2 | g03692758 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 确保辅助发动机转速传感器 (2) 无磨损或损坏。 如果辅助发动机转速传感器磨损或损坏，请予以更换。
- 将新 O 形密封圈 (6) 安装到辅助发动机转速传感器 (2)。
- 将辅助发动机转速传感器 (2) 安装到前壳体适配器 (1)。 确保辅助发动机转速传感器正确落座到前壳体适配器中。
- 将六角螺栓 (5) 安装到辅助发动机转速传感器 (2) 并用手拧紧。 拧紧螺栓至扭矩为
14 N·m (123.91 lb in) - 将线束组件 (4) 连接至辅助发动机转速传感器 (2)。 滑动锁扣 (3) 至锁定位置。
Show/hide table
|
| |
| 图 3 | g03692758 |
Show/hide table
|
| |
| 图 4 | g03692739 |
Caterpillar Information System:
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Pressure Sensor
AP1000F Asphalt Paver Machine Systems Steering Column
AP1000F Asphalt Paver Machine Systems Roading Lighting
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Pressure Sensor - Remove and Install
C3.4B Industrial Engine Diesel Exhaust Fluid Filter - Clean/Replace
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pressure Sensor
C3.4B Industrial Engine Coolant (ELC) - Change
AP1000F Asphalt Paver Machine Systems Canopy
C3.4B Industrial Engine Coolant (DEAC) - Change
C3.4B Industrial Engine Welding on Engines with Electronic Controls
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor
AP1000F Asphalt Paver Propel System Bogie
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Pressure Sensor
C3.4B Industrial Engine Product Storage
AP1000F Asphalt Paver Machine Systems Access Door
2864C and 586C Site Prep Tractors C9 Engine Supplement Aftercooler Core - Remove and Install
2864C Site Prep Tractor C9 Engine Supplement Alternator - Remove and Install
2864C Site Prep Tractor C9 Engine Supplement Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Remove and Install
770G and 772G Off-Highway Truck Belt Tensioner - Remove and Install
2864C and 586C Site Prep Tractors C9 Engine Supplement Hydraulic Oil Cooler Core - Remove and Install
C3.4B Industrial Engine Alarms and Shutoffs
2014/08/07 New Oil Level Gauge Gp (Dipstick) Is Now Used on Certain Knuckleboom Loaders {1326}
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Main Control Valve
2864C and 586C Site Prep Tractors C9 Engine Supplement Water Pump - Remove and Install