Transmission Hydraulic Control
Show/hide table
| |
| Illustration 1 | g03590096 |
|
Left side view of transmission | |
Show/hide table
| Item | Qty | Part | Specification Description |
| Lubricate all the seals lightly with the lubricant that is being sealed. | |||
| 1 | 20 | 8T-0100 Bolt | Torque to |
| 2 | 1 | 435-7633 Transmission Harness As | Use the following guidelines in order to the strap the transmission harness assembly to the transmission:
1. Do not allow wires that are not braided to rub on other parts. 2. Do not pull the connector wires tightly. |
| 3 | 4 | 165-4931 Elbow As | Use the following procedure to assemble the elbow assemblies:
1. Remove the nipple assembly from the modulating valve group. 2. Position the elbow assembly to the specified angle of 45 degrees. Refer Illustration 1. Tighten the elbow assembly in the modulating valve group to a torque of 3. Reinstall the nipple assembly to the elbow assembly and tighten to a torque of |
| 4 | 5 | 6V-5215 Bolt | Torque to |
| 5 | 1 | 238-0112 Temperature Sensor Gp | Torque to |
| 6 | 1 | 344-7389 Pressure Sensor Gp | Torque to |
| 7 | 1 | 252-2237 Solenoid Valve Gp | Use the following installation procedure to properly seat the solenoid valve group in the cavity:
1. Place the solenoid valve group in the cavity. 2. Install the bracket. 3. Torque to |
| 8 | 2 | 5P-8347 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g03590098 |
|
Rear view of transmission | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 9 | 1 | Nut | Torque to |
| 10 | 1 | 8T-4190 Bolt | Torque to |
| 11 | 2 | 6V-6317 Bolt | Torque to |
| 12 | 1 | Bolt | Torque to |
Caterpillar Information System:
2014/02/13 New Weld-On Ground Engagement Tool (GET) Segments Now Available for Certain Load Haul Dump Machines {6100, 6800, 6818}
2014/02/21 An Improved Walkway Group Is Now Used on 797F Off-Highway Trucks {7255}
Check the Steering Frame Lock Pin on Certain R1700G and R2900G Load Haul Dump Machines{7506} Check the Steering Frame Lock Pin on Certain R1700G and R2900G Load Haul Dump Machines{7506}
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Output Transfer Gears - Adjust
794 AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Diagnostic Trouble Codes
794 AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Event Codes
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential Pinion Preload - Adjust
994K Wheel Loader Transmission Oil Filter - Replace
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential Backlash and Bearings - Adjust
794 AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Data Link - Test
794 AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Data Link Configuration Status - Test
794 AC Off-Highway Truck VIMSTM 3G and Truck Payload Measurement System (TPMS) Sensor Signal (PWM) - Test
424B Backhoe Loader Hydraulic and Steering System Relief Valve (Loader) - Test and Adjust
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Fuel Tank
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Cab
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Air Conditioner Lines
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Fuel Tank
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Pump Lines - Rear
424B and 424B HD Backhoe Loaders Hydraulic and Steering System Bank Valve (Backhoe) - Mechanically Operated
424B and 424B HD Backhoe Loaders Hydraulic and Steering System Bank Valve (Loader) - Mechanically Operated
424B and 424B HD Backhoe Loaders Hydraulic and Steering System Sideshift Slide Lock Circuit
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Instrument Panel
14M3 Motor Grader Machine Systems Air Conditioner and Mounting
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Oil Filter (Hydraulic Return)