PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEA WATER OUTLET ELBOW ON CERTAIN 3512C HD AND 3516C HD MARINE ENGINES EQUIPPED WITH SEA WATER COOLED PLATE-TYPE HEAT EXCHANGER
Usage:
TEBE0122-00
Show/hide table
| 03Sep2013 |
U-390
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEA WATER OUTLET ELBOW ON CERTAIN 3512C HD AND 3516C HD MARINE ENGINES EQUIPPED WITH SEA WATER COOLED PLATE-TYPE HEAT EXCHANGER |
|
| 1371 1380 | PS44001 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44001" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2015 |
PROBLEM
Show/hide table
| In certain operating conditions, the SCAC inlet and outlet temperatures can exceed targeted values in sea water temperatures at or above 90 degrees F (32 degrees C). |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3512C HD | T3R00215-00218, 221-222, 227-234, 237-246, 248-249 T3S00200-00201 T3W00204-00207 |
| 3516C HD | TKS00208-00213 TKY00204-00207 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3P6061 | GASKET |
| 1 | 5B3265 | GASKET-COPPER |
| 1 | 1439208 | ELBOW (see Action Required) |
| 1 | 1446074 | GASKET |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Replace the 143-9207 Orifice Outlet Elbow on the sea water pump with a 143-9208 Full Flow Outlet Elbow. An option is to rework the 143-9207 Orifice Outlet Elbow by machining the orifice out to the 76 mm nominal inside diameter of the elbow may also be used. Refer to Image 1. Remove the old part number and stamp or etch the 143-9208 part number and change level (-03) on the elbow after machining. Refer to the Service Claim Allowances. |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
| If a new 143-9208 Full Flow Outlet Elbow is not used, $150 is allowed for machining the existing 143-9207 Orifice Outlet Elbow. |
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 327-5258 TORQUE CONVERTER HOUSING ON CERTAIN CX28 TRANSMISSIONS IN U.S. MILITARY TACTICAL VEHICLES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 327-5258 TORQUE CONVERTER HOUSING ON CERTAIN CX28 TRANSMISSIONS IN U.S. MILITARY TACTICAL VEHICLES
PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER COUPLINGS ON CERTAIN 3512C AND 3516C MARINE ENGINES EQUIPPED WITH A PLATE TYPE HEAT EXCHANGERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER COUPLINGS ON CERTAIN 3512C AND 3516C MARINE ENGINES EQUIPPED WITH A PLATE TYPE HEAT EXCHANGERS
PRODUCT SUPPORT PROGRAM FOR REMOVING DIODES IN THE LEFT HAND STARTER DRIVE HARNESS RETURN CIRCUIT ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REMOVING DIODES IN THE LEFT HAND STARTER DRIVE HARNESS RETURN CIRCUIT ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R-9250, 0R-3860, AND 0R-3233 REMAN SCAVENGE OIL PUMPS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R-9250, 0R-3860, AND 0R-3233 REMAN SCAVENGE OIL PUMPS IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR UPGRADING THE DIGIT AND GDET FIRMWARE ON CERTAIN UPSB505 DOUBLE CONVERSION UNINTERRUPTIBLE POWER SUPPLIES PRODUCT SUPPORT PROGRAM FOR UPGRADING THE DIGIT AND GDET FIRMWARE ON CERTAIN UPSB505 DOUBLE CONVERSION UNINTERRUPTIBLE POWER SUPPLIES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUMES DISPOSAL AND FUEL HOSES ON CERTAIN PMC27 RENTAL GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUMES DISPOSAL AND FUEL HOSES ON CERTAIN PMC27 RENTAL GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 9X-8889 BOLT ON THE 333-3648 IDLER GP WITHIN THE 274-3822 PUMP DRIVE ON CERTAIN TH48-E70 TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 9X-8889 BOLT ON THE 333-3648 IDLER GP WITHIN THE 274-3822 PUMP DRIVE ON CERTAIN TH48-E70 TRANSMISSIONS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 326-2623 PRELUBRICATION PUMP COVER SCREWS ON CERTAIN G3508B, G3512B, G3516B, G3520B, G3606, G3608, G3612, AND G3616 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 326-2623 PRELUBRICATION PUMP COVER SCREWS ON CERTAIN G3508B, G3512B, G3516B, G3520B, G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TURBO EXHAUST MANIFOLD AND TURBO BELLOWS ON CERTAIN 3512C AND 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE TURBO EXHAUST MANIFOLD AND TURBO BELLOWS ON CERTAIN 3512C AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE AIR SHUT OFF BRACKETS ON CERTAIN C27 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REMOVING THE AIR SHUT OFF BRACKETS ON CERTAIN C27 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS AND OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS OPERATING IN PRIME OR CONTINUOUS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS AND OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS OPERATING IN PRIME OR CONTINUOUS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR COMPRESSOR SUPPORT BRACKET ON CERTAIN C-18 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR COMPRESSOR SUPPORT BRACKET ON CERTAIN C-18 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 5P-9297 CLIP ON CERTAIN G3516, G3516B, AND G3520B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 5P-9297 CLIP ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWITCH AND CONTACTOR FOR THE JACKET WATER HEATER CONTROL ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWITCH AND CONTACTOR FOR THE JACKET WATER HEATER CONTROL ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING CLUTCH NO 6 ON CERTAIN CX48-P2300 PETROLEUM TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING CLUTCH NO 6 ON CERTAIN CX48-P2300 PETROLEUM TRANSMISSIONS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C27, AND C32 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C27, AND C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CRANKSHAFT DAMPER ON CERTAIN C18 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CRANKSHAFT DAMPER ON CERTAIN C18 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 342-4469 EXHAUST BYPASS WATER LINES ON CERTAIN G3512B PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 342-4469 EXHAUST BYPASS WATER LINES ON CERTAIN G3512B PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR FAN GUARDS ON CERTAIN 3516C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR FAN GUARDS ON CERTAIN 3516C GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE RADIATOR ON CERTAIN PM3516B POWER MODULES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE RADIATOR ON CERTAIN PM3516B POWER MODULES
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CH65C/D, AND 95E CHALLENGER TRACTORS, 5110B, 5130, AND 5130B EXCAVATORS, AD30, AND AD45B UNDERGROUND ARTICULATED TRUCKS, R1600G, AND R1700G LOAD HAUL DUMP MACHINES, CIPI WHEEL TRAC PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN CH65C/D, AND 95E CHALLENGER TRACTORS, 5110B, 5130, AND 5130B EXCAVATORS, AD30, AND AD45B UNDERGROUND ARTICULATED TRUCKS, R1600G, AND R1700G LOAD HAUL DUMP MACHINES, CIPI WHEEL TRAC
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN C7, C9, C9.3, C10, C11, C12, C13, C15, C16, C18, C27, C32, 3126B, 3306B, 3406C, 3412C, 3412E, AND 3456 ENGINES AND GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN C7, C9, C9.3, C10, C11, C12, C13, C15, C16, C18, C27, C32, 3126B, 3306B, 3406C, 3412C, 3412E, AND 3456 ENGINES AND GENERATOR SETS