Radiator - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7573     | 连杆支架     | 2     |
开始:
- 安装固定销(车斗)。 请参阅拆解和组装, KENR8337-01, "挡圈和销(车斗)- 拆卸和安装"。
- 拆下罩(散热器)。 请参阅拆解和组装, "罩(散热器)- 拆卸和安装"。
- 拆卸曲轴箱护罩。 请参考拆解和组装, "曲轴箱护罩 - 拆卸和安装"。
- 拆下后冷器。 请参阅拆解和组装, "后冷器 - 拆卸和安装"。
- 卸下制冷剂冷凝器。 请参阅拆解和装配, "制冷剂冷凝器 - 拆卸和安装"。
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
Show/hide table
热的冷却液、蒸汽和碱会造成人身伤害。 在工作温度下,发动机冷却液是热的而且处在压力下。 散热器和所有到加热器的管路或发动机中都有热的冷却液或蒸汽。 与它们的任何接触都会造成严重烫伤。 只有当发动机停机且散热器盖已经冷却到可以徒手触摸时,再慢慢拆下过滤器盖以释放压力。 冷却系统调节器含碱。 应避免它与皮肤和眼睛接触。 |
注: 将盖和塞安装在全部孔口上,以防系统污染。
- 排放散热器。 有关排放散热器的正确步骤,请参阅操作和保养手册, SEBU8394, "冷却系统冷却液(ELC)- 更换"。
- 拆下机油排放控制箱。 控制箱位于前保险杠上。
- 拆下电缆带 (3) 。 将软管 (2) 从膨胀箱 (1) 上断开。
Show/hide table
图 1 | g03379938 |
- 将适当的起吊设备连接到膨胀水箱 (1) 上。 膨胀箱 (1) 的重量约为 85 kg (190 lb)。
Show/hide table
图 2 | g03379942 |
- 拆下螺栓 (4) 和膨胀箱 (1) 。
- 断开上部散热器管组件 (5) 。 将支座螺栓 (6) 从防护罩组件 (7) 上拆下。
Show/hide table
图 3 | g03379987 |
- 断开下部散热器管组件 (8) 。
Show/hide table
图 4 | g03379989 |
- 将工具 (A) 和适当的起吊设备安装到散热器 (9) 。 散热器 (9) 的重量约为 400 kg (882 lb)。
Show/hide table
图 5 | g03380001 |
- 拆下螺栓 (10) 和散热器 (9) 。
Caterpillar Information System:
826K Landfill Compactor Cooling System Coolant Level - Check
773E Off-Highway Truck Engine Supplement Fan - Install
330F MHPU Mobile Hydraulic Power Unit Machine System Electronic Control (Pilot System)
826K Landfill Compactor Cooling System Coolant Extender (ELC) - Add
773E Off-Highway Truck Engine Supplement Fan - Remove
Upper Front Suspension Mounting is Failing on Certain 773F and 775F Off-Highway Trucks{7051, 7201} Upper Front Suspension Mounting is Failing on Certain 773F and 775F Off-Highway Trucks{7051, 7201}
MH3037, MH3049 and MH3059 Material Handlers Air Conditioning and Heating Air Conditioner Lines
826K Landfill Compactor Cooling System Coolant (ELC) - Change
2013/07/11 New Engine Harness Assembly Is Now Used On Certain Applications Equipped With C9 Engines {1408}
773E Off-Highway Truck Engine Supplement Refrigerant Condenser - Remove and Install
773G and 775G Off-Highway Trucks TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 773G and 775G Off-Highway Trucks TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
773G and 775G Off-Highway Trucks TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 773G and 775G Off-Highway Trucks TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Hood - Remove and Install
826K Landfill Compactor Crankcase Guard Compartment and Power Train Guard Compartment - Clean
C15 and C18 Petroleum Generator Sets General Hazard Information
826K Landfill Compactor Cooling System Coolant Sample (Level 1) - Obtain
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Operation Information
826K Landfill Compactor Cooling System Coolant Sample (Level 2) - Obtain
Cat® Detect and Cat® MineStar System Onboard Configuration for the MS352 Satellite Receiver Receiver Configuration
825K Soil Compactor Cooling System Coolant (ELC) - Change
793F CMD Off-Highway Truck/Tractor Braking System MID 116 - CID 1893 - FMI 02
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Work Tool Coupler Operation
2013/06/17 Improved Fuel, Oil, and Water Lines Groups Are Used on Certain 3500 Engines {1052, 1252, 1307}
825K Soil Compactor Cooling System Coolant Extender (ELC) - Add