Window Wiper Motor - Remove and Install
Removal Procedure
Note: The wiper motor must be in the OFF position.
- Remove cover (1). Remove bolt (2) and cup (3) .
Show/hide table
 | |
| Illustration 1 | g01207837 |
- Remove screw (4) and bolt (5). Reposition cover (6) to the side.
Show/hide table
 | |
| Illustration 2 | g01207838 |
- Remove bolts (7) and cover assembly (8) .
Show/hide table
 | |
| Illustration 3 | g01207842 |
- Remove rod (9). Reposition floor mat (10) to the side.
Show/hide table
 | |
| Illustration 4 | g01207848 |
- Remove bolts (12) and cover (11) .
Show/hide table
 | |
| Illustration 5 | g01207860 |
- Remove linkage (15). Remove nuts (13) and bolts (14). Disconnect harness assembly (17). Remove windshield wiper motor (16) .
Show/hide table
 | |
| Illustration 6 | g01207861 |
Installation Procedure
- Position windshield wiper motor (16). Connect harness assembly (17). Install nuts (13) and bolts (14). Install linkage (15) so that the ball joint for rod (9) (not shown) is straight above the nut.
Note: The wiper motor must be in the OFF position.
Show/hide table
| | |
| Illustration 7 | g01207861 |
- Position cover (11) and install bolts (12) .
Show/hide table
| | |
| Illustration 8 | g01207860 |
- Install rod (9). Position floor mat (10) .
Show/hide table
| | |
| Illustration 9 | g01207848 |
- Position cover assembly (8) and install bolts (7) .
Show/hide table
| | |
| Illustration 10 | g01207842 |
- Position cover (6) to the side. Install screw (4) and bolt (5) .
Show/hide table
| | |
| Illustration 11 | g01207838 |
- Install cup (3) and bolt (2). Install cover (1) .
Show/hide table
| | |
| Illustration 12 | g01207837 |
Caterpillar Information System:
MH3049 Material Handler Machine Systems Storage Box and Covers (Cab) - Remove and Install
MH3049 Material Handler Machine Systems Seat - Remove and Install
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Remove
Installation Instructions for the 384-9639 Snow Blade and Mounting Gp On Certain Motor Graders{6158, 6159} Installation Instructions for the 384-9639 Snow Blade and Mounting Gp On Certain Motor Graders{6158, 6159}
988K XE Wheel Loader Power Train Final Drive and Wheel - Remove and Install - Front
C13, C15, and C18 Tier 4 Final Engines Cooling Fan Speed - Test
C13, C15, and C18 Tier 4 Final Engines Air Shutoff - Test
SE50 V and SE50VT Asphalt Screeds Screed Cleanup
120K, 120K Series 2, 12K, 140K, 140K Series 2 and 160K Motor Graders Power Train Electronic Control System Starting System
SE50 V and SE50VT Asphalt Screeds Principles and Techniques
824K Wheel Dozer Bulldozer Stabilizer - Lubricate
C13 Tier 4 Final Engines Wiring (Jacket Water Heater)
826K Landfill Compactor Axle Oscillation Bearings - Lubricate
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Disassemble
826K Landfill Compactor Backup Alarm - Test
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Assemble
MH3049 Material Handler Machine Systems Seat Suspension - Remove and Install
988K XE Wheel Loader Power Train Final Drive Planetary - Remove and Install
MH3049 Material Handler Machine Systems Heating and Air Conditioning Unit - Remove and Install
24M Motor Grader Braking and Hydraulic Fan System Parking Brake Control
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train Oscillating Axle (Rear) - Remove and Install
986H Wheel Loader Trunnion Support (Oscillating Axle, Front) - Remove and Install
826K Landfill Compactor Service Brake Wear Indicator - Check
MH3049 Material Handler Machine Systems Hydraulic Lockout Control - Install