Valve Covers,
Usage:
Remove Valve Covers
1. Loosen the crankcase breather pipe hose clamp (left valve cover only).
2. Remove the valve cover mounting bolts. Remove the valve cover.
Install Valve Covers
1. Install a new valve cover seal if necessary.
NOTE: When installing new seal, cut the seal to provide a minimum of 1 in. (2,5 cm) overlap.
2. Position the valve cover on engine and install mounting bolts.
3. Tighten the crankcase breather pipe hose clamp.
Caterpillar Information System:
D348 VEHICULAR ENGINE Aftercooler Cores
D348 VEHICULAR ENGINE Turbochargers
D348 VEHICULAR ENGINE Exhaust Manifolds
D348 VEHICULAR ENGINE Fuel Injection Pump Housing
D348 VEHICULAR ENGINE Variable Timing Unit
D348 VEHICULAR ENGINE Governor
D348 VEHICULAR ENGINE Fuel Ratio Control
D348 VEHICULAR ENGINE Fuel Injection Lines
D348 VEHICULAR ENGINE Fuel Filter Housing
D348 VEHICULAR ENGINE Fuel Filter Elements
D348 VEHICULAR ENGINE Fuel Transfer Pump
D348 VEHICULAR ENGINE Fuel Priming Pump
D348 VEHICULAR ENGINE Fuel Injection Valves
D348 VEHICULAR ENGINE Glow Plugs
D348 VEHICULAR ENGINE Precombustion Chambers
D348 VEHICULAR ENGINE Camshaft Housings
D348 VEHICULAR ENGINE Right Cylinder Head Assembly
D348 VEHICULAR ENGINE Left Cylinder Head Assembly
D348 VEHICULAR ENGINE Spacer Plates
D348 VEHICULAR ENGINE Pistons
D348 VEHICULAR ENGINE Cylinder Liners
D348 VEHICULAR ENGINE Air Compressor
D348 VEHICULAR ENGINE Flywheel
D348 VEHICULAR ENGINE Crankshaft Rear Seal