Usage:
09Jul2013 |
(Revised 14Oct2013) |
Priority | PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A CATERPILLAR PRODUCT IDENTIFICATION PLATE ON CERTAIN RETROFIT SELECTIVE CATALYTIC REDUCTION SYSTEMS |
|
108H 108D 7557 | PI32196 |
NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI32196" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI32196" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
NOTE: | This Revised Service Letter replaces the 09Jul2013 Service Letter. Changes have been made to the Affected Product. |
COMPLETION DATE |
TERMINATION DATE |
31Jan2014 | 31Jul2014 |
PROBLEM
Current retrofit Selective Catalytic Reduction Systems do not carry a Caterpillar Product Identification Plate. These units need to have the appropriate identification plate installed. The Service Information Management System (SIMS) has been updated with new serial numbers. Future service information will be tied to the new serial numbers. |
AFFECTED PRODUCT
Model | Identification Number |
AFTERTREAT-SCR | ES700101-00325 |
PARTS NEEDED
Qty |
Part Number | Description |
4 | 6C3677 | RIVET-POP |
1 | ID_PLATE | PLATE (See Action Required) |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 45% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
MODELS INVOLVED - Retrofit Selective Catalytic Reduction Systems (SCR's) with Legacy (CleanAIR Systems) SCR/EPODS with Factory Reference Numbers 760001 through 760323. Parts: Contact the emissions retrofit Field Service Engineer for the Serial Number ID Plate. If necessary, call the emissions product support hotline, 1-877-228-0909, for contact information for the Field Service Engineer for your dealer. Prior to Installation: Inspect the SCR in order to validate the factory reference tag. Image 1 shows common locations of reference tags on Current Retrofit Selective Catalytic Reduction System. Once the existing reference tag is found on the SCR, confirm that the number of the existing reference tag matches the reference number on the new serial number identification plate. Refer to attached Rework Procedure after the factory reference number is validated. |
Image1 |
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification: US Canada |
SERVICE CLAIM ALLOWANCES
NOTE: This is a 1.0-hour job | |||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
EXAMPLE COPY OF OWNER NOTIFICATION XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - SCR serial number tags MODELS INVOLVED - Current Retrofit Selective Catalytic Reduction Systems with Legacy ( CleanAir ) Factory Reference Numbers : 760001 - 760323 Dear Cat Product Owner: The Retrofit Selective Catalytic Reduction System ( SCR ) needs to be inspected and have the appropriate identification plate installed . You will not be charged for the service performed. Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. Please refer the dealer to their Service Letter dated 09Jul2013 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 09Jul2013 Service Letter |
Attach the serial number identification plate to the dosing cabinet that controls that SCR. The serial number identification plate is to be attached to the cabinet door using four 6C-3677 Pop Rivets at the lower right hand corner of the door. Refer to Image 1.1.1, and Image 1.1.2. Measure 38 mm / 1.5 inches from bottom edge, and 38 mm / 1.5 inches from right hand outer edge of door frame. Mark the holes to be drilled, and drill using 5/32 drill bit. Pop rivet the serial number identification plate to the door. |
Image1.1.1 |
Image1.1.2 |