System Pressure - Release
压力释放步骤
Show/hide table
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。 卸下液压系统的部件或管路时,确保所有的作业机具都已降到地面上,而且液压油温度已冷。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将机器移至远离其他工作机器和人员的光滑、水平的位置。
注: 机器上仅允许停留一位操作员。 让其他所有人员远离车辆或离开操作人员的视野。
- 将转向操纵杆置于 NEUTRAL(空档)位置。
- 接合停车制动器。
- 将选装部件降到地面。
- 停止发动机。
- 将钥匙转到 ON (接通)位置,但不要起动发动机。
- 确认没有启动机具切断控制装置。
- 在整个行程范围内移动操纵杆数次。 这样将释放可能存在于机具液压系统的任何压力。
- 松开液压油箱上的加注口盖,以便释放油箱中的压力。
- 拧紧液压油箱上的加注口盖。
- 已经释放了液压系统压力,所以可以拆卸管路和部件。
Caterpillar Information System:
AP500F Asphalt Paver Machine Systems Control Valve (Vibratory) - Assemble
AP555E and BG555E Asphalt Pavers Reference Material
AP500F Asphalt Paver Machine Systems Control Valve (Vibratory) - Disassemble
AP655D Asphalt Paver Machine Systems Control Valve (Vibratory) - Install
AP655D Asphalt Paver Machine Systems Control Valve (Vibratory) - Remove
AP655D Asphalt Paver Machine Systems Control Valve (Auxiliary) - Install
AP555E and BG555E Asphalt Pavers Machine Systems Control Valve (Auxiliary) - Assemble
AP555E and BG555E Asphalt Pavers Machine Systems Control Valve (Auxiliary) - Disassemble
AP655D Asphalt Paver Machine Systems Control Valve (Auxiliary) - Remove
992K Wheel Loader and 854K Wheel Dozer Machine Systems Position Sensor (Throttle)
C9.3 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install - Rail
AP655D and BG655D Asphalt Pavers Machine Systems Piston Pump Neutral (Auger Conveyor and Drag Conveyor) - Test and Adjust
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 039 - CID 0153 - FMI 08
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 039 - CID 0154 - FMI 08
AccuGrade® Compaction GPS Mapping and Measurement System Flashing Messages
AP655D and BG655D Asphalt Pavers Machine Systems Piston Motor Case Drain Flow (Auger Conveyor and Drag Conveyor) - Test
C9.3 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
AS3251C Asphalt Screed Crown Control - Lubricate
AccuGrade® Laser (CB420) CB 21 Remote Auto/Manual Switch Failure
AS3251C Asphalt Screed Height Adjuster - Lubricate
AP655D Asphalt Paver Machine Systems Accumulator (Track Tension) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet Manifold Pressure Sensor - Remove and Install
AP655D and BG655D Asphalt Pavers Machine Systems Conveyor Drive Chain (Auger) - Check and Adjust
AS3251C Asphalt Screed Thickness Control - Lubricate