Illustration 1 | g01299237 |
(1) Apply 4C-9507 Retaining Compound to the twenty-four 8I-0212 Studs .
(2) Apply 4C-5593 Anti-Seize Compound to the thirty two 8I-0184 Adjustment Nuts .
(3) Tighten 1K-6872 Locknuts in order to achieve a spring height of 52 ± 2 mm (2.05 ± 0.08 inch).
Berm Extensions
Non-Berm
Illustration 2 | g01301703 |
(1) Tighten 3K-2889 Locknuts until 2 ± 1 mm (0.0787 ± 0.0394 inch) of bolt thread is protruding through the locknuts.
(2) Apply 10 mm (0.3937 inch) wide by 5 mm (0.1969 inch) thick bead of 257-8023 Thermal Grease to heaters before installing on screed plate.
12 Inch Berm
Illustration 3 | g01301707 |
(1) Tighten 3K-2889 Locknuts until 2 ± 1 mm (0.0787 ± 0.0394 inch) of bolt thread is protruding through the locknuts.
(2) Apply 10 mm (0.3937 inch) wide by 5 mm (0.1969 inch) thick bead of 257-8023 Thermal Grease to heaters before installing on screed plate.
18 Inch Berm
Illustration 4 | g01301708 |
(1) Tighten 3K-2889 Locknuts until 2 ± 1 mm (0.0787 ± 0.0394 inch) of bolt thread is protruding through the locknuts.
(2) Apply 10 mm (0.3937 inch) wide by 5 mm (0.1969 inch) thick bead of 257-8023 Thermal Grease to heaters before installing on screed plate.
24 Inch Berm
Illustration 5 | g01301709 |
(1) Tighten 3K-2889 Locknuts until 2 ± 1 mm (0.0787 ± 0.0394 inch) of bolt thread is protruding through the locknuts.
(2) Apply 10 mm (0.3937 inch) wide by 5 mm (0.1969 inch) thick bead of 257-8023 Thermal Grease to heaters before installing on screed plate.