Fuel Filter Base
Usage:
(1) Stud (two) used when filter base is installed high on the inlet manifold. Install stud so end of stud extends above surface of manifold boss to a dimension of ... 24.3 ± 1.5 mm (.96 ± .06 in)
Torque for stud ... 35 ± 5 N·m (26 ± 4 lb ft)
(2) Put 9S3265 Retaining Compound on the tapered end of stud to a distance of ... 7.6 mm (.30 in)
(3) Sealing surface of stud.
NOTE: Do not damage this surface.
(4) Distance from sealing surface of base to end of stud ... 24.6 ± 1.3 mm (.97 ± .05 in)
(5) Torque for stud ... 70 ± 15 N·m (50 ± 11 lb ft)
Caterpillar Information System:
3406B (PEEC) DIESEL TRUCK ENGINE Primary Fuel Filter
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Nozzle And Adapter (Earlier)
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Transfer Pump
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Lines
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Rack Controls
3406B (PEEC) DIESEL TRUCK ENGINE Timing Position Sensor And Timing Solenoid (BTM)
3406B (PEEC) DIESEL TRUCK ENGINE Governor And Fuel Pump Drive Group (Timing Advance Unit)
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump Camshaft
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Pump
3406B (PEEC) DIESEL TRUCK ENGINE Manual Shutoff Group
3406B (PEEC) DIESEL TRUCK ENGINE Shutoff Solenoid Solenoid (Energized To Run)
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Priming Pump Group
3406B (PEEC) DIESEL TRUCK ENGINE Ether Starting Aid
3406B (PEEC) DIESEL TRUCK ENGINE Idler Gear Shaft Pilot Bore
3406B (PEEC) DIESEL TRUCK ENGINE Front (Timing) Gear Group
3406B (PEEC) DIESEL TRUCK ENGINE Idler Gear Assembly 2W7455 Gear Assembly
3406B (PEEC) DIESEL TRUCK ENGINE Accessory Drive Group
3406B (PEEC) DIESEL TRUCK ENGINE Pulley Tightener Group
3406B (PEEC) DIESEL TRUCK ENGINE Pulley And Damper Groups
3406B (PEEC) DIESEL TRUCK ENGINE Front Housing And Covers
3406B (PEEC) DIESEL TRUCK ENGINE Engine Front Support
3406B (PEEC) DIESEL TRUCK ENGINE Camshaft
3406B (PEEC) DIESEL TRUCK ENGINE Intake Valve Timing