3304B & 3306B INDUSTRIAL & MARINE ENGINES Caterpillar

NOTE: Make reference to Guideline for Reusable Parts; Pistons and Cylinder Liners, Form No. SEBF8049 and SEBF8068.

(1) Bore in liner (new) ... 120.675 ± 0.025 mm (4.7509 ± .0010 in)

Use again maximum bore when measured near upper end of the wear surface of the cylinder liner ... 120.78 mm (4.755 in)

(2) Thickness of flange on liner ... 10.282 ± 0.020 mm (.4048 ± .0008 in)

(3) Filler band.

Cylinder Liner Installation

Put liquid soap on bottom liner bore in block, on grooves in lower liner, and on O-rings. Install O-rings on liner. Put filler band (3) in engine oil for a moment and install on liner. Immediately install liner in cylinder block (before expansion of filler band).