Torque Converter
Show/hide table
 | |
| Illustration 1 | g02924859 |
Show/hide table
| Specification for 116-3825 Torque Converter Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 34 | 6V-1820 Bolt | Torque to 60 ± 7 N·m (44 ± 5 lb ft). |
| 2 | 8 | 6V-7673 Bolt | Torque to 105 ± 15 N·m (77 ± 11 lb ft). |
Show/hide table
| Clearance Between Components | Clearance Across the Diameter | Running Clearance (1) | |
| (A) Stator and the Turbine | New | 0.49 to 1.01 mm (0.019 to 0.040 inch) |
0.25 to 0.51 mm (0.010 to 0.020 inch) |
| Maximum worn | 1.50 mm (0.059 inch) |
0.75 mm (0.030 inch) |
|
| (B) Stator and the Impeller | New | 0.49 to 1.01 mm (0.019 to 0.040 inch) |
0.25 to 0.51 mm (0.010 to 0.020 inch) |
| Maximum worn | 1.50 mm (0.059 inch) |
0.75 mm (0.030 inch) |
|
Show/hide table
| ( 1 ) | Half of the clearance across the diameter |
Caterpillar Information System:
R1300G Series II Load Haul Dump Braking System Brake Control Valve (Parking)
795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Position Sensor (Dump Body)
3412 Generator Set Engines Fuel Transfer Pump
793D Off-Highway Truck Air System and Brakes Towing
583T Pipelayer Engine Starting with Jump Start Cables
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685} Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
AP-1000D and BG-260D Asphalt Pavers Safety Messages
414E, 416E, 420E and 430E Backhoe Loaders Axles, Differential and Brakes Differential
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Exhaust Extension - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Axles, Differential and Brakes Differential
C15 Generator Set Engines CAN Data Link Circuit - Test
69D and 769D Off-Highway Truck and 771D Quarry Truck Hydraulic System Relief Valve (Hoist Dual Stage) - Test and Adjust
R1300G and R1300G Series II Load Haul Dumps Hydraulic System Pressure Reducing Valve (Pilot Oil)
R1600G Load Haul Dump Power Train Updrive Gears - Disassemble
R1600G Load Haul Dump Power Train Updrive Gears - Assemble
C15 Generator Set Engines Ether Injection System - Test
C15 Generator Set Engines E255 Diagnostic Reset
C4.4 and C6.6 Engines for Caterpillar Built Machines ECM Harness Connector Terminals
AP-1000D and BG-260D Asphalt Pavers Machine Systems Piston Motor (Drag Conveyor) - Remove
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Transmission (Power Shift) Transmission
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Lift Cylinder - Remove and Install
2005/09/12 New Procedures Improve the Service Life of the Check Valve {5051, 5067}
AccuGrade® Laser (CB420) MID 114 - CID 2259 - FMI 07