Display Position Adjustment
Do not position the display in order to cover any warning stickers or other important information.
Do not position the display in order to impede the entry to the machine cab or exit from the machine cab.
Do not position the display in order to obstruct the operator's outside view.
Do not position the display in order to obstruct the operator's view of machine instrumentation.
Do not position the display in order to impair access to operator controls or movement of operator controls.
Show/hide table
| |
| Illustration 1 | g01367987 |
|
Mounting Clamp Assembly (1) Clamp (2) Clamp Handle | |
Show/hide table
| |
| Illustration 2 | g01368064 |
| (3) Ball Mount Base | |
Show/hide table
| |
| Illustration 3 | g01367988 |
|
Installation of the Display and Mounting Assembly (3) Base for the Ball Mount (4) Display (5) Mounting Clamps (6) Dumbbell (7) Mounting Clamp Handles | |
Refer to Illustration 3. In order to position the display (4), hold the display (4) securely. Loosen the mounting clamp handle or handles (7) on the mounting clamps (5) for the display . Adjust the display (4). Tighten the handle or handles (7) on the mounting clamps (5) for the display (4) after the display (4) is positioned.
Show/hide table
| |
| Illustration 4 | g01368029 |
|
Example of an Installation on a Wheel Loader (3) Base for the Ball Mount (4) Display (5) Mounting Clamp (8) Mounting Bracket for the Display (9) Mounting Bolt for the Ball Mount | |
Show/hide table
| |
| Illustration 5 | g01368041 |
|
Example of an Installation on a Wheel Loader (10) Installed WAVS | |
Caterpillar Information System:
C4.4 and C6.6 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
Work Area Vision System General Information
793D Off-Highway Truck/Tractor Steering Tank and Filter - Assemble
Work Area Vision System Camera - Clean
Work Area Vision System Display - Clean
Work Area Vision System Modes Of Operation
Work Area Vision System Safety
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Analog Throttle Position Sensor Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Indicator Lamp Circuit - Test
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170} Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
CB-534D, CB-534D XW and CB-564D Vibratory Compactors Machine Systems Direction and Speed Control - Remove and Install
773F Off-Highway Truck And 775F Off-Highway Truck Assembly Procedure {7000, 7006, 7960} 773F Off-Highway Truck And 775F Off-Highway Truck Assembly Procedure {7000, 7006, 7960}
Work Area Vision System Display Picture Adjustment - Select Display Settings
Work Area Vision System Display Description
Work Area Vision System Camera Description
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Implement Hydraulic Service Mode
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Monitoring System Display Module
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Monitoring System Data Link
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Monitoring System Menu Navigation
RM-300 Reclaimer Mixer Machine Systems Position Sensor (Rear Steering) - Calibrate
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Monitoring System Performance Menu
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Monitoring System Totals Menu
725, 730, 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Monitoring System Settings Menu