Flywheel
Usage:
Remove & Install Flywheel
1. Fasten a hoist to Tooling (A), and install Tooling (A) to the flywheel with bolt (1).
2. Remove bolts (2) that hold the flywheel to the crankshaft, and remove the flywheel. The weight of the flywheel is 59 kg (130 lb).
NOTE: The following steps are for installation of the flywheel.
3. Fasten a hoist and Tooling (A) to the flywheel with bolt (1).
4. Put the flywheel in position on the dowel of the crankshaft, and install the bolts that hold it. Tighten the bolts to a torque of 270 ± 25 N·m (200 ± 18 lb ft).
NOTE: For more detailed information regarding the flywheel, refer to the topic "Flywheel" in the Specifications Manual.
Caterpillar Information System:
3406C MARINE ENGINE Timing Gear Cover
3406C MARINE ENGINE Cylinder Liners
3406C MARINE ENGINE Timing Gears & Plate
3406C MARINE ENGINE Camshaft
3406C MARINE ENGINE Crankshaft Rear Seal & Wear Sleeve
3406C MARINE ENGINE Crankshaft Front Seal & Wear Sleeve
3406C MARINE ENGINE Camshaft Bearings
3406C MARINE ENGINE Crankshaft
3406C MARINE ENGINE Pistons & Connecting Rod Assemblies
3406C MARINE ENGINE Crankshaft Main Bearings
3406C MARINE ENGINE Connecting Rod Bearings
3406C MARINE ENGINE Piston Cooling Tubes
3406C MARINE ENGINE Flywheel Housing
3408C & 3412C MARINE ENGINES Systems Operation
3408C & 3412C MARINE ENGINES Testing & Adjusting
3304B & 3306B MARINE ENGINES Introduction
3304B & 3306B MARINE ENGINES Engine Design
3304B & 3306B MARINE ENGINES Fuel Injection Pump
3304B & 3306B MARINE ENGINES Fuel Injection Pump Housing
3304B & 3306B MARINE ENGINES Fuel Injection Nozzle
3304B & 3306B MARINE ENGINES Fuel Priming Pump And Primary Fuel Filter
3304B & 3306B MARINE ENGINES Governor
3304B & 3306B MARINE ENGINES Fuel Transfer Pump
3304B & 3306B MARINE ENGINES Fuel Ratio Control